56-21-00
ALL ú ú B01 Page 804 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
PASSENGER CABIN WINDOW PLATE (PLUG) - REMOVAL/INSTALLATION
__________________________________________________________
1. General_______
A. This procedure has two tasks. The first task is the removal of the plate on the passenger cabin window. The second task is the installation of the plate on the passenger cabin window.
B. Refer to AMM 56-21-00/401, Passenger Cabin Windows, for the removal and installation of the passenger cabin window.
TASK 56-21-11-004-001-B00
2. Passenger Cabin Window Plate (Plug) Removal (Fig. 401)___________________________________________
A. General
(1) The plate will be referred to as the plug in this task.
B. Consumable Materials
(1)
G00834 Cloth - Clean , Dry, Lint-Free
(2)
G00270 Tape - Masking
C. References
(1) AMM 25-21-46/401, Sidewall Panels
D. Access
(1) Location Zone
100 Upper Half of Fuselage
E. Procedure
S 014-002-B00
(1)
Remove the sidewall panel to get access to the plug
(AMM 25-21-46/401).
(2)
Remove the insulation pillow.
S 034-004-B00
(3)
Remove the clip adjusting screws and window retaining clips (10 locations).
(4)
Disconnect the grounding strap from the plug.
S 014-003-B00
S 034-005-B00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
56-21-11
ALL ú ú B02 Page 401 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
PLUG SURFACE A.
Passenger Cabin Window Plate (Plug) Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
56-21-11
ALL ú ú B01 Page 402 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 014-010-B00
(5) Remove the plug and seal.
NOTE: You do not have to remove the seal from the plug if the seal
____
is not damaged.
S 954-011-B00
CAUTION: UNLESS YOU IMMEDIATELY INSTALL THE PLUG, INSTALL A SHEET OF
_______ CLOTH OR EQUIVALENT MATERIAL TO THE PLUG SURFACES WITH MASKING TAPE. THIS WILL PREVENT DAMAGE TO THE PLUG AFTER YOU REMOVE THE PLUG.
(6) Install a sheet of cloth or equivalent material to the plug surfaces.
TASK 56-21-11-404-007-B00
3. Passenger Cabin Window Plate (Plug) Installation (Fig. 401)
________________________________________________
A. General
(1) The plate will be referred to as the plug in this task.
B. Consumable Materials
(1)
G00034 Cheesecloth - Clean, Dry, Lint-Free
(2)
B00083 Solvent - Aliphatic Naphtha, TT-N-900 Type II (Optional to Freon TF)
(3)
B00037 Solvent - Freon TF (Optional to Aliphatic Naphtha)
(4)
G01393 Gloves - Rubber
C. References
(1)
AMM 20-30-51/201, Miscellaneous Materials
(2)
AMM 25-21-46/401, Sidewall Panels
D. Access
(1) Location Zone
100 Upper Half of Fuselage
E. Prepare for Installation
S 954-008-B00
(1) Remove the sheet of cloth or equivalent material from the plug surfaces if installed.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
56-21-11
ALL ú ú B02 Page 403 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 WINDOWS(57)
