C.  
Procedure

 S 024-002-B00
 (1)  
From in the airplane, remove the hatch.

 (a)  
Pull down on the release handle.

 (b)  
Pull the top of the hatch inboard.

 (c)  
Use the lift handle to pull the hatch up and out of the opening.

 TASK 52-21-00-404-003-B00
 3.  Emergency Exit Hatch Installation (Fig. 402)_________________________________
 A.  References
 (1)  
AMM 52-21-00/501, Emergency Exit Hatch

 (2)  
AMM 52-21-12/401, Emergency Exit Hatch Lining

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-21-00
 ALL  ú ú B02 Page 401 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
HATCH (2 LOCATIONS)
SEE A
RELEASE HANDLE
LIFT HANDLE 1
A
A
HATCH FRAME
HATCH
A
2. PIVOT FITTING
1. SEAL
3. SILL
FUSELAGE
STRUCTURE

4. PIVOT HOOK
EMERGENCY EXIT HATCH (NOT FULLY CLOSED)
A-A

HATCH FRAME
2.
 PIVOT FITTING

3.
 SILL

1. SEAL
FUSELAGE STRUCTURE
4. PIVOT HOOK
EMERGENCY EXIT HATCH (FULLY CLOSED) A-A Emergency Exit Hatch Installation Figure 401
A07263
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-21-00
 ALL  ú ú B02 Page 402 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
HATCH REMOVAL (EXTERNAL)

2
1
STEP 1  STEP 2
STEP 3  STEP 4 
1 2 RELEASE HANDLE COVER ATTACHED WITH SCREWS RELEASE HANDLE COVER ATTACHED WITH BRACKETS HATCH REMOVAL (INTERNAL) 
Figure 402 Emergency Exit Hatch Operation 

A07278
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-21-00
 ALL  ú ú B02 Page 403 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. Access
 (1)  
Location Zone
 116 Right Emergency Exit Hatch
 117 Left Emergency Exit Hatch

 (2)  
Access Panel
 2403L Left Emergency Hatch
 2404R Right Emergency Hatch

 C.
Procedure

 S 034-004-B00
 (1)  If you install a new hatch, remove the lining from the hatch (AMM 52-21-12/401).
 NOTE: This is necessary to subsequently adjust the hatch.
____
 S 214-011-B00
 (2)  
Read the decal on the upper surface of the hatch frame to make sure you install the correct hatch in the opening.

 S 984-005-B00

 (3)  
Put the hatch in the opening.

 CAUTION: HOLD THE HATCH IN A VERTICAL POSITION WHILE THE PIVOT
_______ FITTING ENGAGES THE PIVOT HOOK. IF YOU DO NOT HOLD THE HATCH IN A VERTICAL POSITION, YOU CAN CAUSE DAMAGE TO THE SEAL.
 (a)  
Engage the pivot fitting with the pivot hook.

 (b)  
Make sure the bottom edge of the hatch aligns with the sill.

 S 984-006-B00
 (4)  
Close and latch the hatch.

 (a)  
Pull down on the release handle.

 (b)  
At the same time, push the top of the hatch into the opening.

 (c)  
Push the release handle up to engage the latches.

 (5)  
Adjust the hatch if it is new (AMM 52-21-00/501).

 S 824-008-B00
 NOTE: If you install a used hatch in its initial position,
____
 it is not necessary to adjust it.

 S 714-009-B00
 (6)  Do a test of the hatch (AMM 52-21-00/501).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(90)