52-13-41
ALL ú ú B07 Page 407 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
b) If the bolts continue to touch the structure, remove the threads from the bolt.
NOTE:____ Make sure the bolt head touches the sleeve when the bolt threads are removed.
(n) (o) Apply a fay surface seal to the body panel and install the panel (AMM 51-31-00/201).Install the aft entry door (AMM 52-13-00/401).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-13-41
ALL ú ú B04 Page 408 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
AFT ENTRY DOOR GATES - REMOVAL/INSTALLTION
__________________________________________
1. General
_______
A. There is a top gate and a bottom gate on the door. The procedure to remove and install them is identical.
B. This procedure contains two tasks:
(1)
The removal of a gate from the door.
(2)
The installation of a gate on the door.
TASK 52-13-61-004-001-B00
2. Remove a Gate from the Aft Entry Door (Fig. 401)
_____________________________________
A. Consumable Materials
(1)
B00148 Solvent - Methyl Ethyl Ketone (MEK), TT-M-261
B.
References
(1)
AMM 25-61-35/201, Escape Slide Assembly (Door Mounted)
(2)
AMM 52-09-14/401, Diaphragm-Mechanical Seals
C.
Access
(1)
Location Zone
110 Aft Entry Door
(2)
Access Panel
4601L Aft Entry Door
D.
Procedure
S 014-002-B00
(1)
On the bottom gate, remove the emergency escape slide (AMM 25-61-35/201).
S 014-003-B00
(2)
Remove the lining that is inboard of the gate.
S 034-004-B00
(3)
Remove the diaphragm-mechanical seal from the gate (AMM 52-09-14/401).
NOTE: It is not necessary to remove the seal from around the
____
entire door.
S 034-005-B00
(4)
Disconnect the push rod from the gate.
(5)
Remove the bolts that hold the hinge to the door.
S 034-006-B00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
52-13-61
ALL ú ú B01 Page 401 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 024-007-B00
(6) Remove the gate from the door.
NOTE: Keep the fillers that are between the hinge on the gate
____ and the door for subsequent installation.
S 114-008-B00
WARNING:_______DO NOT GET MEK IN YOUR MOUTH, OR EYES OR ON YOUR SKIN. DO NOT BREATHE THE FUMES FROM MEK. PUT ON PROTECTIVE GOGGLES AND GLOVES WHEN YOU USE MEK. KEEP MEK AWAY FROM SPARKS, FLAME AND HEAT. MEK IS A POISONOUS AND FLAMMABLE SOLVENT WHICH CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
(7) Use the MEK to clean the sealant from the area between the door and the gate.
TASK 52-13-61-404-009-B00
3. Install a Gate on the Aft Entry Door (Fig. 401)
____________________________________
A. Consumable Materials
(1)
A00247 Sealant - Chromate, Type BMS 5-95
B.
References
(1) 中國航空網(wǎng) m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 艙門 DOORS 1(86)
