52-31-00
 ALL  ú ú B02 Page 604 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 CARGO COMPARTMENT DOORS - REPAIRS
_________________________________
 1.  General_______
 A.  This procedure contains a task to repair the door stop fittings.
 B.  You can repair cracks that are less than 45 degrees away from the centerline of the door stop fitting. If the crack is not in this area, you must replace the stop fitting.
 TASK 52-31-00-308-001-B00
 2.  Cargo Compartment Door Stop Fitting Repair (Fig. 801)__________________________________________
 A.  Standard Tools and Equipment
 (1)  
Saw to cut a 0.06 +/-0.01 inch slot in the door stop fitting

 (2)  
Spotface tool with diameter 0.002 to 0.012 inch larger than the bearing plate

 B.  
Consumable Materials

 (1)  
C00259 Enamel - Primer, BMS 10-11, Type 1

 (2)  
A00247 Sealant - BMS 5-95

 (3)  
C00523 Coating - Alodine, MIL-C-5541

 C.  
References

 (1)  
51-21-21/701, Prepaint Cleaning and Treatment

 (2)  
51-21-41/701, Alodine Coating

 (3)  
AMM 51-21-99/701, Decorative Exterior Paint System

 D.  
Procedure

 S 028-004-B00
 (1)  
Remove the bearing plate.

 S 218-003-B00

 (2)  
Examine the crack.

 (a)  
Make sure the crack is less than 45° from the centerline of the door stop fitting.

 (b)  
Make sure the crack stops at or before the hole of the door stop fitting.

 S 968-005-B00
 (3)  
If the crack is not in the correct location, replace the door stop fitting.

 S 358-006-B00

 (4)  
If the crack is in the correct location, repair the door stop fitting:

 (a)  
Cut a 0.06 +/-0.01-inch wide slot to remove all of the crack.

 (b)  
Make a spotface in the door stop fitting to give a 0.002 to 0.012-inch clearance with the bearing plate.

 (c)  
Prepare the surfaces (Method III) and apply Alodine (Ref 51-21-41/701 and 51-21-21/701.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-31-00
 ALL  ú ú B01 Page 801 ú Jul 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SEE A (EXAMPLE) DOOR STOP FITTING 
BEARING PLATE 
A DOOR STOP FITTING 
A 
DOOR STOP FITTING A  45` 45` (WITH CRACK) A-A  0.06 |0.01 INCH A-A (WITH SLOT) 
Figure 801 Cargo Compartment Door Repair 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-31-00
 ALL  ú ú B02 Page 802 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (d)  Apply primer (AMM 51-21-99/701).
 S 358-002-B00
 (5)  Bond the bearing plate to the door stop fitting with BMS 5-95 sealant.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-31-00
 ALL  ú ú B01 Page 803 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 CARGO COMPARTMENT DOOR BALANCE MECHANISM - REMOVAL/INSTALLATION
_______________________________________________________________
 1.  General_______
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(107)