EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-11
 ALL  ú ú B02 Page 409 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 434-023-B00
 (10)
 Install the hinge covers.

 (a)  
Put the cover brackets (13) below the heads of the bolts through the latch pins.

 (b)  
Tighten the bolts to 110 to 130 pound-inches.

 (c)  
Install the hinge covers on the cover brackets.

 S 434-024-B00
 (11)
 Install the external handle.

 (a)  
Push the external handle (7) and shaft (8) into the handle mechanism.

 (b)  
Install the cam plate (5), washer (9) and nut (10).

 (c)  
Lock the nut with a cotter pin.

 S 414-025-B00
 (12)
 Install the lining on the door (Ref 52-11-31/401).

 (13)
 Install the door on the airplane (Ref 52-11-00/401).

 S 414-026-B00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-11-11
 ALL  ú ú B02 Page 410 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 FORWARD ENTRY DOOR GUIDE ARM - REMOVAL/INSTALLATION
___________________________________________________
 1. General
_______
 A. This procedure contains two tasks:
 (1)
The removal of the guide arm from the forward entry door

 (2)
The installation of the guide arm on the forward entry door.

 TASK 52-11-21-004-001-B01
 2. Forward Entry Door Guide Arm Removal (Fig. 401)
____________________________________
 A. Access
 (1)  
Location Zone
 105 Forward Entry Door

 B.
Procedure

 S 034-002-B01
 (1)  Disconnect the guide arm from the fuselage. (a) Open the door sufficiently to get to the radius links (16 and 27). (b) Remove the retaining ring (25). (c) Remove the pin (26) and the washers (13 and 23). (d) Move the radius link away from the guide arm. (e) Remove the latch lever screw (8), nut (18), washers (19) , latch lever (20), and shaft (21).
 S 034-003-B01
 (2)  Move the guide arm away from the fuselage.
 CAUTION:_______ BE CAREFUL WHEN YOU MOVE THE DOOR. WITH THE GUIDE ARM DISCONNECTED, YOU CAN CAUSE DAMAGE TO THE DOOR WHEN YOU MOVE IT.
 (a) (b) (c)  Close the door sufficiently to get to the cover on the hinge.Push the cover on the hinge until you can get to the guide arm.Pull the guide arm out and away from the guide plates.
 S 034-004-B01
 (3)  Disconnect the guide arm from the door. (a) Remove the four bolts that hold the fitting (1) to the hinge support.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT A TRIGGER ú

 52-11-21
 ú CONFIG ú B01 Page 401 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TOP GUIDE
TOP HINGE  SHIM PLATE
ASSEMBLY A SEE A
TOP HINGE
A
COVER
TOP 1.400 |0.005 INCH SPIGOT (USE SHIMS
BOTTOM GUIDE TO GET THIS
DIMENSION) FWD PLATE
A-A
INBD
3. TOP GUIDE PLATE
HINGE 
SUPPORT  26. PIN 
IN THE DOOR 
STRUCTURE  SHIM 
HINGE 
1. FITTING  ARM 
27. TOP RADIUS 
25. RETAINING LINK 
RING 

5.
 LATCH PIN

6.
 GUIDE ARM BUSHING

7.
 THRUST BEARING

8.
 LATCH LEVER

24. ROD END SCREW
BEARING SPRING PIN
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 艙門 DOORS 1(51)