32-35-11
 ALL  ú ú 01 Page 402 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
16. MANUAL EXTENSION  ACCESS DOOR
CABLE 
MNGEA 
CABLE MNGEA 
SEE  A  CABLE MLGEA (R) 

14. TURNBUCKLE
SEE B
15. CABINCABLE MLGEA (L)
 FLOOR PANEL FWD
INBD
A
2.
 WASHER

3.
 ROLLER NOSE GEAR

14. BRACKET
 ASSEMBLYWHEEL WELL
CEILING
1. BOLT
4. TORQUE TUBE
12. RETURN SPRING 5. ROLLER FITTING
7. BEARING RETAINER NUT
11. TORQUE TUBE  QUADRANT
8. INBOARD BEARING
 13. PRESSURE SEAL (NOT SHOWN)
FWD
9.
 SPACER

10.
 OUTBOARD BEARING

B
Nose Gear Manual Extension Release Mechanism Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-35-11
 ALL  ú ú 01 Page 403 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (6)  S 434-015Connect the cable MNGEA at the turnbuckle (14).
 (7)  S 434-016Connect the return spring (11) to the torque tube quadrant (10).
 (8)  S 824-017Adjust the manual extension system (Ref 32-35-00/501).
 (9)  S 714-018Do a test on the manual extension system (Ref 32-35-00/501).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-35-11
 ALL  ú ú 01 Page 404 ú Mar 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 NOSE LANDING GEAR MANUAL EXTENSION SYSTEM CABLES - REMOVAL/INSTALLATION
_______________________________________________________________________
 1.  General________
 A. This procedure contains two tasks:
 (1)  
The removal of the cables of the manual extension system from the nose landing gear.

 (2)  
The installation of the cables of the manual extension system of the nose landing gear.

 TASK 32-35-21-004-001
 2.  Nose Landing Gear Manual Extension System Cables Removal (Fig. 401)________________________________________________________
 A. References
 (1)  
20-10-04/401, Air Seal of the Control Cables

 (2)  
20-10-91/401, Control Cables

 B.
Procedure to Remove the Cables of the Manual Extension system

 S 014-002
 (1)  
Remove the cabin floor panel (12).

 S 034-003

 (2)  
Disconnect the return spring (9) from the torque tube quadrant (7).

 S 034-004

 (3)  
Remove the turnbuckle locking clips.

 (a)  
Loosen the turnbuckle (11) of the cable MNGEA.

 S 034-005
 (4)  
Remove the cotter pin.

 (a)  
Disconnect the cable of the manual extension handle from the control drum (3).

 S 014-006
 (5)  
Open the access door (2) of the manual extension.

 (a)  
Remove the handle and the cable (1).

 S 034-007
 (6)  
Remove the cable retainer.

 (a)  
Disconnect the cable MNGEA from the control drum (3).

 S 034-008
 (7)  
Remove pressure seal (8) in the wheel well ceiling of the nose landing gear (Ref 20-10-04/401).

 S 034-009

 (8)  
Remove the cotter pins.

 (a)  
Disconnect the cable MNGEA from the torque tube pulley (7).

 (9)  
Remove the cables (Ref 20-10-91/401).

 S 034-010
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 2(145)