R b_ if there is 28VDC:
R - replace the LAMP-28V 40MA (Ref. PC 32511201).
R 2_ if there is no ground signal:
R a_ repair the wiring from the parking brake electrical control
R valve (102GG) pin A/4 to the ground terminal.
R b_ repair the wiring from the parking brake electrical control
R valve (102GG) to the N/W steering electrical box (5GC) pin
R A/3 to pin A/A.
R
R (3) if the light is ON during this test:
R (a) do a check for a ground signal at pin A/A of the N/W steering
R electrical box (5GC).
R 1_ if there is no ground signal:
R a_ repair the wiring from the parking brake electrical control
R valve (102GG) pin A/4 to the ground terminal.
R b_ repair the wiring from the parking brake electrical control
R valve (102GG) to the N/W steering electrical box (5GC) pin
R A/3 to pin A/A.
R
R (4) If the fault continues:
R - replace the CTL VALVE-PARK BRK, ELEC (102GG) (Ref. AMM TASK 32-45-
R 53-000-001) (Ref. AMM TASK 32-45-53-400-001).
R **ON A/C ALL
TASK 32-45-00-810-804
CONFIG PARK BRK ON Warning is not Shown on the Upper ECAM DU with the PARK BRK Control Switch at ON
1. Possible Causes
_______________
- CTL VALVE-PARK BRK,ELEC. (72GG) R - CTL VALVE-PARK BRK, ELEC (102GG)
- PRESS SW-PARK BRK (86GG)
- wiring from the pin B/D of the parking brake electrical control valve (72GG) to the ground terminal
- wiring from the parking brake electrical control valve (72GG) pin B/E to
the SDAC (1WV1) pin AD/7C R - wiring from the pin B/4 of the parking brake electrical control valve R (102GG) t the ground terminal R - wiring from the pin A/A of the parking brake pressure switch (86GG) to the R parking brake electrical control valve (102GG) pin B/5. R - wiring from the parking brake electrical control valve (102GG) pin A/3 to R the SDAC (1WV1) pin AD/7C
- wiring from the pin A/A of the parking brake pressure switch (86GG) to the parking brake electrical control valve (72GG) pin B/D.
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 32-45-17-000-001 AMM 32-45-17-400-001
AMM 32-45-51-000-001
AMM 32-45-51-400-001
R AMM 32-45-53-000-001 R AMM 32-45-53-400-001 R
3. Fault Confirmation
__________________
A. Not applicable.
Removal of the Park Brake - Pressure Switch (86GG)Installation of the Park Brake - Pressure Switch (86GG)Removal of the Parking-Brake Electrical Control-Valve 72GGInstallation of the Parking-Brake Electrical Control-Valve 72GG Removal of the Parking-Brake Electrical Control-Valve Installation of the Parking-Brake Electrical Control-Valve
4. Fault Isolation
_______________
**ON A/C 001-049, 051-099, 101-105, 151-154, 201-207,
A. If the CONFIG PARK BRK ON warning does not come into view when the PARK BRK control switch is at ON (during flight phases 3 and 4):
- set the PARK BRK selector switch to ON.
- do a check for a ground signal at pin B/E of the parking brake electrical control valve (72GG) (Ref. ASM 32-45/01).
(1) If there is no ground signal:
- do a check for a ground signal at pin B/D of the parking brake electrical control valve (72GG) (Ref. ASM 32-45/01).
(a) If there is no ground signal:
- do a check and repair the wiring from the pin B/D of the parking brake electrical control valve (72GG) to the ground terminal (Ref. ASM 32-45/01).
(b) If there is a ground signal:
- replace the CTL VALVE-PARK BRK,ELEC. (72GG) (Ref. AMM TASK 32-45-51-000-001) (Ref. AMM TASK 32-45-51-400-001).
(2) If there is a ground signal: 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 起落架 LANDING GEAR 2(65)
