- examine the electrical connector for corrosion.
(a) If there is corrosion:
- replace the SERVO CTL-N/W STEERING (6GC) (Ref. AMM TASK 32-51-51-000-001) and (Ref. AMM TASK 32-51-51-400-001).
(b) If there is no corrosion:
- dry the electrical connector of the N/W steering servo control (6GC) and connect it.
(2) If there is no water:
- remove the steering servo valve (Ref. AMM TASK 32-51-51-000-002)
- do a check for water in the two electrical connectors of the N/W steering servo control.
(a) If there is water:
- examine the electrical connectors for corrosion.
1 If there is corrosion:
_
- replace the SERVO CTL-N/W STEERING (6GC) (Ref. AMM TASK 32-51-51-000-001) and (Ref. AMM TASK 32-51-51-400-001).
2 If there is no corrosion:
_
- dry the two electrical connectors and install the steering servo valve (Ref. AMM TASK 32-51-51-400-002).
(b) If there is no water:
- install the steering servo valve (Ref. AMM TASK 32-51-51-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page A206
Aug 01/05 CES
B. If the fault continues, read the TROUBLE SHOOTING DATA of the BSCU (Ref. 32-42-00, P.Block 301):
- if the trouble shooting data gives the fault code 745: refer to paragraph C.
- if the trouble shooting data gives the fault code 671: refer to paragraph D.
- if the trouble shooting data gives the fault code 654: refer to paragraph E.
NOTE : If code XXX is shown after a free fall extension ,no maintenance
____
action is necessary
C. If the fault continues and if the TROUBLE SHOOTING DATA gives the fault code 745:
- replace the steering servo valve (Ref. AMM TASK 32-51-51-000-002) and (Ref. AMM TASK 32-51-51-400-002).
(1) If the fault continues:
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring between the BSCU (10GG) pins AB/12E, 12F, 13E, 13F, 14E, 14F and the N/W steering servo control (6GC) pins A/G,H,E,F,C,D (Ref. ASM 32-51/01).
(2) If the fault continues:
- check the voltage at the sensors 3GC and 4GC (Ref. AMM TASK 32-51-19-220-001).
(3) If the fault continues:
- do the check of the charge pressure of the NLG shock absorber. (Ref. AMM TASK 12-14-32-614-004)
D. If the fault continues and if the TROUBLE SHOOTING DATA gives the fault code 671:
- do the door ground opening/closing (Ref. AMM TASK 32-22-00-010-001) and (Ref. AMM TASK 32-22-00-410-001).
(1) If you can set the door ground opening control lever to the closed position:
- replace the steering servo valve (Ref. AMM TASK 32-51-51-000-002) and (Ref. AMM TASK 32-51-51-400-002)
(2) If you cannot set the door ground-opening control lever to the closed position:
- do a LGCIU CB(s) Reset.
(a) If the fault continues:
- replace the LGCIU-1 (5GA1) (Ref. AMM TASK 32-31-71-000-001) and (Ref. AMM TASK 32-31-71-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 221-299, 401-499, ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page A207
Aug 01/05 CES
(b) If the fault continues:
- replace the hydraulic control relay 48GA.
(c) If the fault continues:
- replace the SAFETY VALVE-L/G SYS ISOLATION (49GA) (Ref. AMM TASK 32-31-17-000-001) and (Ref. AMM TASK 32-31-17-400-001).
(d) If the fault continues:
- replace the SEL VALVE-L/G DOORS (41GA) (Ref. AMM TASK 32-31-34-000-001) and (Ref. AMM TASK 32-31-34-400-001).
(e) If the fault continues:
- do a check and repair the: . wiring from the landing gear system isolation safety valve (49GA) pin A/B to the hydraulic control relay (48GA) pin A/2. . wiring from the landing gear doors selector valve (41GA) pins A/B, F to the LGCIU1 pins AA/1A, 1B. . wiring from the hydraulic control relay (48GA) pin A/X, to the ground service bus changeover relay (53GA) pin B2. . wiring from the hydraulic control relay (48GA) pin A/A to the first terminal block. . wiring from the hydraulic control relay (48GA) pin A/B to the first terminal block. . wiring from the hydraulic control relay (48GA) pin A/Z to the ADIRU1 (1FP1) pin AA/13H, to the ADIRU3 (1FP3) pin AA/13H, to the LGCIU1 (5GA1) pin AA/10K (Ref. ASM 32-31/05) (Ref. ASM 32-31/07).
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 起落架 LANDING GEAR 2(138)
