(4) Remove the warning notice(s).
F 『 EEFF : ALL E Page 51078-31-17
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E E E SWITCH - BLOCKER DOOR DEPLOY (4103KS1,4103KS2) - INSPECTION/CHECK
_________________________________________________________________
TASK 78-31-17-210-001
Detailed Visual Inspection of the Deploy Switches and Triggers
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific flashlight No specific softnose pliers No specific warning notice No specific access platform 1 m (3 ft. 3 in.) No specific Torque Wrench : range 35 to 44 lbf.in
(0.39 to 0.49 m.daN)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP2245 *
finish paint EA4 blue 5991 (Ref. 70-30-00)
F 『 EEFF : ALL E Page 60178-31-17
E E Feb 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
78-30-00-081-041 Make the Thrust Reverser Serviceable after
Maintenance
78-30-00-481-041 Make the Thrust Reverser Unserviceable for
Maintenance
78-31-17-000-001 Removal of the Blocker Door Deploy Switch
(4103KS1,4103KS2)
78-31-17-000-002 Removal of the Beam Electrical Harness
78-31-17-000-003 Removal of the Blocker Doors Actuation Levers
78-31-17-400-001 Installation of the Blocker Door Deploy Switch
(4103KS1,4103KS2) 78-31-17-400-002 Installation of the Beam Electrical Harness 78-31-17-400-003 Installation of the Blocker Doors Actuation Levers 78-31-17-710-002 Operational Test of the Pivoting Door Deploy Switch
R 78-32-41-860-001 Manual Deployment of the Blocker Door
R 78-32-41-860-002 Manual Stowing of the Blocker Door CMM 783117 CMM 783236 78-31-17-991-300 Fig. 601
3. Job Set-up
__________
Subtask 78-31-17-941-056
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice to tell persons not to energize the FADEC 1(2).
F 『 EEFF : ALL E Page 60278-31-17
E E Feb 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
Subtask 78-31-17-010-055
B. Get Access
(1) Open the fan cowl doors (Ref. TASK 71-13-00-010-040): FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(2) Put the access platform in position.
Subtask 78-31-17-040-053
C. Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041). Subtask 78-31-17-010-056
D. Removal of the Access Door:
(1) Remove the screws which attach the deploy-switch access door.
(2) Remove the deploy-switch access door. R Subtask 78-31-17-010-078 R E. Manually Deploy the Blocker Doors (Ref. TASK 78-32-41-860-001).
4. Procedure
_________
(Ref. Fig. 601/TASK 78-31-17-991-300)
Subtask 78-31-17-210-050
A. Detailed Visual Inspection of the Deploy Switches and Triggers.
(1) Do a visual inspection of the deploy switch, the trigger and related R hardware, and of the electrical connector using a flashlight as R follows:
R NOTE : Levers andbushings that are removed due to corrosion, faulty
____
R operation or play discrepancies may be sent to the shop for repair, review and possible return to service (Ref. CMM 783236) and (Ref. CMM 783117).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 1(53)
