F 『
 E C F M E
 E E
 E 56-5B E
 E E
 **ON A/C 051-053, 151-151, 201-210,

 (Ref. Fig. 402A/TASK 78-11-11-991-302-A)
 **ON A/C ALL

 Subtask 78-11-11-480-051
 A. Installation of a sling
 (1) Install HANDLING SLING (RSE1133) to core nozzle.

 (2) Lift the sling until it supports the weight of the core nozzle assembly (5).

R **ON A/C 001-049, 054-099, 101-149, 152-199, 211-299, 301-399, 401-499,
 Subtask 78-11-11-020-050
 B. Removal of the core nozzle assembly
 (1) Remove the Turbine Rear Frame (TRF) drain tube (20). (Ref. TASK 71-73-49-000-005)

 (2) Remove the bolts (25), washers (30), and nuts (10) that attach the core nozzle assembly (5) to the engine flange (88 locations).

 (3) Remove the core nozzle assembly (5) from the engine.
 **ON A/C 051-053, 151-151, 201-210,

 Subtask 78-11-11-020-050-A
 B. Removal of the core nozzle assembly
 (1) Remove the Turbine Rear Frame (TRF) drain tube (20). (Ref. TASK 71-73-49-000-005)

 (2) Remove the bolts (25), washers (30), and nuts (10) that attach the bracket (15) to the core nozzle assembly (5).

 F 『 EEFF : ALL E Page 40878-11-11
 E E Aug 01/05 E E ECES E F 『 E C F M E E E E 56-5B E

 Parts That Attach The Core Nozzle Assembly
 Figure 402A/TASK 78-11-11-991-302-A

 F 『R EEFF : 051-053, 151-151, 201-210, E Page 40978-11-11
 E E May 01/05 E E ECES E E 56-5B E

 F  『
 E  C F M  E
 E  E

 E E

 (3) Remove the bolts (25), the supports (35), and the nuts (10) that attach the core nozzle assembly (5) to the engine flange. (18 locations)

 (4) Remove the remaining bolts (25), the washers (30), and the nuts (10) that attach the core nozzle assembly (5) to the engine flange . (68 locations)

 (5) Remove the core nozzle assembly (5) from the engine.

 **ON A/C ALL
 Subtask 78-11-11-080-051
 C. Remove the sling from the core nozzle assembly (5).
 F 『 EEFF : ALL E Page 41078-11-11
 E E Feb 01/05 ERE
ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 TASK 78-11-11-400-041
 Installation of the Core Nozzle Assembly
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
 No specific access platform 1 m (3 ft. 3 in.)
 No specific Torque Wrench : range 36.00 to 220.00 lbf.in

 (0.40 to 2.60 m.daN)
 RSE1133 1 HANDLING SLING

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP5063  *
 anti-seize compound (Ref. 70-30-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors 71-73-49-400-005 Installation of the Turbine Rear Frame Drain Tube 78-30-00-081-041 Make the Thrust Reverser Serviceable after
 Maintenance
 78-30-00-481-041 Make the Thrust Reverser Unserviceable for

 Maintenance
 78-36-00-010-040 Opening of the Thrust Reverser Doors
 78-36-00-410-040 Closing of the Thrust Reverser Doors

 F 『 EEFF : ALL E Page 41178-11-11
 E E Feb 01/05 ERE ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
R **ON A/C 001-049, 054-099, 101-149, 152-199, 211-299, 401-499,
 78-11-11-991-301 Fig. 401
 **ON A/C 051-053, 151-151, 201-210,
 78-11-11-991-301-A Fig. 401A
 **ON A/C 301-399,
 78-11-11-991-301-B Fig. 401B R **ON A/C 001-049, 054-099, 101-149, 152-199, 211-299, 301-399, 401-499,
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 1(15)