(2)
Open the access door:
FOR 7170HM1
413DL
FOR 7170HM2
423DL
R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499,
4. Procedure
_________
R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Post SB 36-1038 For A/C 001-004,
Subtask 36-11-43-020-054
A. Removal of the Thermostat-Filter of the Fan Air Valve-Control
(Ref. Fig. 402/TASK 36-11-43-991-003)
(1)
Remove and discard the lockwire from the filter (4).
(2)
Loosen and remove the filter (4).
R 1EFF : 001-049, 056-099, 101-149, 151-199, 1 36-11-43Page 416 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Thermostat Filter
Figure 402/TASK 36-11-43-991-003
R 1EFF : 001-049, 056-099, 101-149, 151-199, 1 36-11-43Page 417 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(3)
If the filter is dirty, clean the filter (Ref. TASK 36-11-43-100-001), or replace it with a new or a clean filter (Ref. TASK 36-11-43-000-003) and (Ref. TASK 36-11-43-400-003).
(4)
Remove and discard the seal (2).
(5)
Put a blanking plug on the opening of the thermostat (3).
R 1EFF : 001-049, 056-099, 101-149, 151-199, 1 36-11-43Page 418 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499,
TASK 36-11-43-400-003
Installation of the Thermostat-Filter of the Fan Air Valve-Control
WARNING : MAKE SURE THAT THE PNEUMATIC SYSTEM IS DEPRESSURIZED BEFORE YOU START
_______
WORK ON THE PNEUMATIC SYSTEM.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plug
No specific warning notice
No specific access platform 2 m (6 ft. 7 in.)
No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. 04-034 USA MIL-A-907 D
R ANTI-SEIZE LUBRICANT ,REGULAR GRADE (Ref. 20-31-00)
Material No. 19-009 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.5MM DIA
(Ref. 20-31-00)
R 1EFF : 001-049, 056-099, 101-149, 151-199, 1 36-11-43Page 419 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
2 seal 36-11-43 01D-060 4 filter 36-11-43 01D-050
D. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 36-1038 For A/C 001-004, 36-11-43-991-003 Fig. 402 R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499,
3. Job Set-up
__________
R **ON A/C 001-049, 056-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 36-1038 For A/C 001-004, Subtask 36-11-43-860-052
A. Aircraft Maintenance Configuration
(1)
Make sure that the aircraft electrical circuits are energized (Ref. TASK 24-41-00-861-002).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PNEUMATIC 氣源 1(94)
