曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

1. Get access to the L/G page on the MCDU (Ref. TASK 31-32-00-860-009).
R 2. Open the circuit breaker 2GA on R panel 121VU. R
R 3. Push the LGCIU (No.1) P/BSW.
4.
 Push the NEXT PAGE P/BSW.

5.
 Push the LANDING GEAR SIMULATION P/BSW.

6.
 Push the applicable L/G(s) P/BSW.

7.
 Push the applicable P/BSW
(EXTENDED or UPLOCKED).

 

5. Close-up
________ Subtask 32-69-00-860-057 R A. Aircraft Configuration
 (1) On the MCDU:
-
the MCDU shows the L/G menu.

-
the MCDU shows the LGCIU menu.

-
the MCDU shows LANDING GEAR SIMULATION on the menu.

-
the MCDU shows the LANDING GEARSIMULATION page.

-
the MCDU shows the applicable L/G(s) page.

-
the applicable '<' goes off (flightsimulated).

 -
push (in) the RETURN P/BSW until the CFDS MENU is shown

 -
push (in) the MCDU MENU P/BSW

 -put the BRT switch to OFF.
R (2) Close the circuit breaker 2GA on panel 121VU. R
 1EFF : ALL 1 32-69-00Page 507 1 1 Nov 01/03 1 1 1CES 1 1EFF : ALL 1 32-69-00Page 508 1 1 Nov 01/03 1 1 1CES 1

R R  (3) Do the ground configuration after flight configuration procedure (Ref. TASK 32-00-00-860-002).
 Subtask 32-69-00-942-051
 B. Removal of Equipment
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Remove the safety barriers.
 (3) Remove the warning notice(s).
 (4) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 

 

 

　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架9(111)