R TASK 28-11-00-600-008- 02
R Biocidal Shock Treatment for Moderate Contamination - Using Biobor Biocide With
R a Metered Injection Rig
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______
R START A TASK ON OR NEAR:
R - THE FLIGHT CONTROLS
R - THE FLIGHT CONTROL SURFACES
R - THE LANDING GEAR AND THE RELATED DOORS
R - COMPONENTS THAT MOVE.
R WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______
R GEAR.
R 1. Reason for the Job__________________
R Do this procedure not more than 10 days after a sample of fuel is taken and
R moderate contamination is found
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific safety barriers
R No specific warning notices
R No specific 1 METERING EQUIPMENT - BIOCIDE, HAMMONDS FUEL ADDITIVES
R INC.(CAGE CODE 0U7J1)
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 17-003
R BIOCIDE/FUEL ADDITIVE (Ref. 20-31-00)
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 12-11-28-650-003 R 12-11-28-650-004 R 12-32-28-281-001 R 12-32-28-281-003 R R 24-41-00-861-002 R R 24-41-00-862-002 R R 28-00-00-910-001 R 28-11-00-600-008 R R 28-25-00-650-001 R 31-60-00-860-001 R 31-60-00-860-002 R 32-00-00-481-001 R R 49-32-11-610-001 R 49-32-11-610-002 R 49-32-41-920-001 R 73-11-10-920-001
R 3. Job Set-up
__________
R Subtask 28-11-00-941-103
R A. Safety Precautions Pressure Refuel with Automatic Control Pressure Refuel with Manual Control Drain Water Content Sample Fuel for Microbiological Contamination Analysis Energize the Aircraft Electrical Circuits from the External Power De-energize the Aircraft Electrical Circuits Supplied from the External Power Fuel Safety Procedures Biocidal Shock Treatment for Moderate Contamination -Using Kathon Biocide With a Metered Injection Rig Pressure Defuel EIS Start Procedure EIS Stop Procedure Installation of the Safety Devices on the Landing Gears Servicing of the Fuel Filter (GTCP 36-300) Fuel Filter Element - Removal/Installation (APS 3200) Replacement of the Fuel Filter (8028KM) (131-9(A)) Remove, Inspect and Replace Fuel Filter Element
R WARNING : OBEY THE FUEL SAFETY PROCEDURES.
_______
R NOTE : This procedure is applicable to MICROBIOLOGICAL CONTAMIN. PROTECT.
____ R MATERIALS (Material No. 17-003) only. The material is Biobor. For R the equivalent procedure with the use of Kathon (Ref. TASK 28-11-R 00-600-008).
R (1) Put the safety barriers in position.
R (2) Make sure that the ground safety locks are installed on the landing R gear (Ref. TASK 32-00-00-481-001).
1EFF : ALL 1 28-11-00Page 319 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 320 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 321 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 322 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 323 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 324 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 28-11-00Page 325 1 1 May 01/05 1 1 1CES 1R C. Referenced Information
R (3) Obey the fuel safety procedures when you do work on the fuel system
R (Ref. TASK 28-00-00-910-001).
R (4) Put warning notices in the cockpit to tell persons not to operate:
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油1(87)
