A. Visual Inspection
(1)
Look for signs of fuel leakage in these areas:
-tank seals and sealant
-structure, brackets and clamps
-fuel pipelines, couplings, bonded items, brackets and clamps.
(2)
Talcum Powder Procedure: WARNING : USE A PROTECTIVE EYE SHIELD/GOGGLES WHEN YOU USE COMPRESSED
_______ AIR. DEBRIS AND/OR HIGH PRESSURE AIR CAN DAMAGE YOUR EYES.
CAUTION : USE THE TALCUM POWDER PROCEDURE ONLY ON THE EXTERNAL
_______
SURFACES OF THE FUEL TANKS.
(a)
Dry the area of the possible leak with a MISCELLANEOUS (Material No. 19-003).
(b)
Dry the area fully with a low pressure, dry and filtered air supply .
(c)
Apply MISCELLANEOUS (Material No. 19-004) to the area with a soft brush.
(d)
Monitor the area for a change in color of the talcum powder. This will show the location of a fuel leak and the rate of the leakage.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-11-00Page 514 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
5. Close-up
________ **ON A/C 001-049, 051-061, 101-103, 201-203,
Subtask 28-11-00-410-055
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the applicable NACA vent intake 550AB, 650AB (Ref. TASK 28-12-47-400-001).
(3)
Install the dry-bay access cover 521AZ, 521BZ, 621AZ, 621BZ (Ref. TASK 57-27-11-400-005).
(4)
Install the access panels 147AZ, 148AZ (Ref. TASK 57-17-11-400-001).
(5)
Install the applicable leading-edge access-panels 521AB, 521CB, 521EB, 522AB, 522CB, 522FB, 522HB, 522JB, 522KB, 522LB, 522NB, 522QB, 621AB, 621CB, 621EB, 622AB, 622CB, 622FB, 622HB, 622JB, 622KB, 622LB, 622NB, 622QB.
(6)
Install the applicable trailing edge access panels 575AB, 575BB, 575CB, 575DB, 575EB, 575FB, 575GB, 575HB, 675AB, 675BB, 675CB, 675DB, 675EB, 675FB, 675GB, 675HB (Ref. TASK 57-51-37-400-004).
(7)
Close the applicable trailing edge access panels 574AB, 574BB, 674AB, 674BB.
(8)
Remove the access platform(s).
(9)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-11-00Page 515 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 062-099, 104-149, 151-199, 204-299, 401-499,
Subtask 28-11-00-410-055-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the applicable NACA vent intake 550AB, 650AB (Ref. TASK 28-12-47-400-001).
(3)
Install the dry-bay access cover 521AZ, 521BZ, 621AZ, 621BZ (Ref. TASK 57-27-11-400-005).
(4)
Install the access panels 147AZ, 148AZ (Ref. TASK 57-17-11-400-001).
(5)
Install the applicable leading-edge access-panels 521AB, 521CB, 521EB, 522AB, 522CB, 522FB, 522HB, 522JB, 522KB, 522LB, 522NB, 522QB, 621AB, 621CB, 621EB, 622AB, 622CB, 622FB, 622HB, 622JB, 622KB, 622LB, 622NB, 622QB.
(6)
Install the applicable trailing edge access panels 574AB, 574BB, 575AB, 575BB, 575CB, 575DB, 575EB, 575FB, 575GB, 575HB, 674AB, 674BB, 675AB, 675BB, 675CB, 675DB, 675EB, 675FB, 675GB, 675HB. (Ref. TASK 57-51-37-400-004).
(7)
Remove the access platform(s).
(8) Close the MLG doors (Ref. TASK 32-12-00-410-001). R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 28-11-00-860-072
B. Aircraft Configuration
(1)
Fully retract the flaps (Ref. TASK 27-50-00-866-009).
(2)
Retract the spoilers fully (Ref. TASK 27-60-00-866-002).
(3)
On the spoiler servo-control, make sure that the pointer on the hex. head is opposite the letter 'O' on the housing.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-11-00Page 516 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
(4) Refuel, defuel or transfer fuel, as necessary (Ref. TASK 28-25-00-869-001) (Ref. TASK 12-11-28-650-003) (Ref. TASK 28-25-00-650-001).
Subtask 28-11-00-942-066
C. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-11-00Page 517 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油1(108)
