R 3. Job Set-up__________
R Subtask 28-11-00-941-113
R A. Safety Precautions
R WARNING : OBEY THE FUEL SAFETY PROCEDURES._______
R NOTE : For the equivalent procedure with the use of Biobor, refer to____
R (Ref. TASK 28-11-00-600-010).
R (1) Obey the fuel safety procedures when you do work on the fuel system
R (Ref. TASK 28-00-00-910-001).
R Subtask 28-11-00-860-116
R B. Aircraft Maintenance Configuration
R (1) Defuel the aircraft (Ref. TASK 28-25-00-650-001).
R 4. Procedure_________
R Subtask 28-11-00-670-073
R A. Biocidal Preventative Treatment for Aircraft in Long-Term Storage - using
R Kathon Biocide with a Metered Injection Rig
R (1) Put MICROBIOLOGICAL CONTAMIN. PROTECT. MATERIALS (Material No. 17-
R 003A) into the METERING EQUIPMENT - BIOCIDE, HAMMONDS FUEL ADDITIVES
R INC.(CAGE CODE 0U7J1).
R (2) Make sure that the METERING EQUIPMENT - BIOCIDE, HAMMONDS FUEL
R ADDITIVES INC.(CAGE CODE 0U7J1) is correctly electrically bonded.
R (3) Connect the output side of the METERING EQUIPMENT - BIOCIDE, HAMMONDS
R FUEL ADDITIVES INC.(CAGE CODE 0U7J1) to the aircraft.
R (4) Connect the fuel tanker to the input side of the METERING EQUIPMENT -
R BIOCIDE, HAMMONDS FUEL ADDITIVES INC.(CAGE CODE 0U7J1).
R (5) Refuel the aircraft (Ref. TASK 12-11-28-650-003) with fuel mixed with
R MICROBIOLOGICAL CONTAMIN. PROTECT. MATERIALS (Material No. 17-003A)
R at a concentration of 50 ppm (by weight).
R (6) Disconnect the METERING EQUIPMENT - BIOCIDE, HAMMONDS FUEL ADDITIVES
R INC.(CAGE CODE 0U7J1) and the tanker from the aircraft.
R 5. Close-up________
R Subtask 28-11-00-942-119
R A. Removal of Equipment
R (1) Remove the ground support and maintenance equipment, the special and
R standard tools and all other items.
TANKS - ADJUSTMENT/TEST
_______________________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
TASK 28-11-00-790-001
Leak Test with Fuel of the Wing-Tank Outer-Cell
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific low pressure, dry and filtered air supply
No specific safety barriers
No specific soft brush
No specific warning notice
No specific access platform 3.0 m (9 ft. 10 in.)
No specific adjustable access platform 3.0 m (9 ft. 10 in.)
No specific adjustable access platform 3.8 m (12 ft. 6 in.)
No specific adjustable access platform 4.3 m (14 ft. 1 in.)
1EFF : ALL 1 28-11-00Page 501 1 1 Aug 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油1(103)
