2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific access platform 1.5 m (4 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 27-23-00-710-002 Operational Test of the Rudder-Travel Limitation Unit
3. Job Set-up
__________ Subtask 27-23-00-860-055
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. TASK 24-42-00-861-001).
Subtask 27-23-00-010-052
B. Get access to the Avionics Compartment R (1) Put the access platform in position below the access door 824. R (2) Open the access door 824.
Subtask 27-23-00-865-052
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04
4. Procedure
_________
Subtask 27-23-00-040-050
A. Deactivation of the Channel 1 of the Rudder Travel Limitation Unit
(1)
On the panel 187VU, remove the relay 13CC1.
(2)
Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CC1.
Subtask 27-23-00-710-055
B. Do the operational test of the rudder travel limitation unit (Ref. TASK 27-23-00-710-002).
5. Close-up
________
Subtask 27-23-00-941-050
A. Safety Precautions
(1)
Put a warning notice in the cockpit to tell the crew that the channel 1 of the rudder travel limitation unit is deactivated.
(2)
Make an entry in the logbook.
Subtask 27-23-00-410-052
B. Close Access R (1) Close the access door 824.
(2) Remove the access platform(s). Subtask 27-23-00-862-052
C. De-energize the ground service network (Ref. TASK 24-42-00-862-001)
TASK 27-23-00-440-001
Reactivation of the Channel 1 of the Rudder Travel Limitation Unit
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific access platform 1.5 m (4 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power TSM 22 PB 101 (for corrective action)
3. Job Set-up
__________
Subtask 27-23-00-860-056
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. TASK 24-42-00-861-001).
Subtask 27-23-00-010-053
B. Get access to the Avionics Compartment R (1) Put the access platform in position below the access door 824. R (2) Open the access door 824.
Subtask 27-23-00-865-053
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱2(97)
