(Ref. Fig. 402B/TASK 27-21-61-991-002-B)
 **ON A/C ALL

 (Ref. Fig. 403/TASK 27-21-61-991-003, 404/TASK 27-21-61-991-006)
 Subtask 27-21-61-860-051

 A. Put the aircraft back to its initial configuration.
 (1)
 Depressurize the Blue hydraulic system (Ref. TASK 29-10-00-864-003).

 (2)
 Remove the PIN - RIGGING (98D27207547000) (48) or RIGGING PIN SET (98D27207516000) pin (98D27207516160) from the cable quadrant (45) (Refer to Detail Q).

 (3)
 Remove the pin PIN, RIGGING - RUDDER CONTROL (98A27901002000) (2) from the tension regulator (1) (Refer to Detail A).

 (4)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (5)
 Remove the warning notice(s).

 **ON A/C 001-003, 051-053,
 Subtask 27-21-61-410-054
 B. Close Access
 (1)
 In the zones 211 and 221, install the floor panels 211GF, 211KF, 221AF, 221EF, 231CF (Ref. TASK 53-12-11-400-001) (Ref. TASK 53-12-12-400-001).

 (2)
 In the zone 241, install the floor panels 231WF, 241BF, 241FF, 241KF (Ref. TASK 53-22-12-400-001) (Ref. TASK 53-32-12-400-002).

 (3)
 In the zone 131, install the ceiling panels 131AC, 131BC, 131CC (Ref. TASK 25-54-12-400-002).

 (4)
 In the zone 131, install the partition panel 131PW (Ref. TASK 25-54-12-400-001).

 (5)
 In the zones 151 and 161, install the ceiling panels 151AC, 151BC, 151CC, 151DC, 161AC, 161BC (Ref. TASK 25-55-11-400-002) (Ref. TASK 25-55-12-400-002).

 (6)
 In the zone 161, install the partition panels 161DW, 162DW (Ref. TASK 25-55-12-400-001).

 (7)
 Close the access doors 312AR, 825, 826.

 (8) Remove the access platform(s). R **ON A/C 151-199, 401-499,
 Subtask 27-21-61-410-054-E
 B. Close Access
 (1)
 In the zones 211, 221 and 231, install the floor panels 211GF, 211KF, 221EF, 231CF 221LF (Ref. TASK 53-12-11-400-001) (Ref. TASK 53-12-12-400-001).

 (2)
 In the zones 231 and 241, install the floor panels 231WF, 241BF, 241FF, 241KF (Ref. TASK 53-22-12-400-001) (Ref. TASK 53-32-12-400-002).

R 1EFF : 001-003, 051-053, 151-199, 401-499, 1 27-21-61Page 444 1 1 Aug 01/05 1 1 1CES 1

 (3)
 In the zone 131, install the ceiling panels 131KC, 131MC, 131NC (Ref. TASK 25-54-12-400-002).

 (4)
 In the zone 131, install the partition panel 131PW (Ref. TASK 25-54-12-400-001).

 (5)
 In the zones 151 and 161, install the ceiling panels 151EC, 151FC, 151GC, 161AC, 161BC (Ref. TASK 25-55-11-400-002) (Ref. TASK 25-55-12-400-002).

 (6)
 In the zone 161, install the partition panels 161DW, 162DW (Ref. TASK 25-55-12-400-001).

 (7)
 Close the access doors 312AR, 825, 826.

 (8) Remove the access platform(s). **ON A/C 301-399,
 Subtask 27-21-61-410-054-D
 B. Close Access
 (1)
 In the zones 211 and 221, install the floor panels 211GF, 211KF, 221EF, 231CF 221LF (Ref. TASK 53-12-11-400-001) (Ref. TASK 53-12-12-400-001).

 (2)
 In the zone 241, install the floor panels 231WF, 241BF, 241FF, 241KF (Ref. TASK 53-22-12-400-001) (Ref. TASK 53-32-12-400-002).

 (3)
 In the zone 131, install the ceiling panels 131AC, 131BC, 131CC, 131DC, 131EC (Ref. TASK 25-54-12-400-002).

 (4)
 In the zone 131, install the partition panel 131PW (Ref. TASK 25-54-12-400-001).

 (5)
 In the zones 151 and 161, install the ceiling panels 151AY, 151AC, 151BC, 151CC, 151DC, 161AC, 161BC (Ref. TASK 25-55-11-400-002) (Ref. TASK 25-55-12-400-002).

 (6)
 In the zone 161, install the partition panels 161DW, 162DW (Ref. TASK 25-55-12-400-001).

 (7)
 Close the access doors 312AR, 825, 826.

 (8)
 Remove the access platform(s).

R 1EFF : 151-199, 301-399, 401-499, 1 27-21-61Page 445 1 1 Aug 01/05 1 1 1CES 1

R  **ON A/C 001-049, 054-099, 101-149, 201-299, 
R  Post SB  53-1143 For A/C 001-003, 
R  Subtask 27-21-61-410-054-C 
R  B. Close Access 
R  (1) In the zones 211 and 221, install the floor panels 211GF, 211KF, 
R  221EF, 231CF 221LF (Ref. TASK 53-12-11-400-001) (Ref. TASK 53-12-12-
R  400-001). 
R  (2) In the zone 241, install the floor panels 231WF, 241BF, 241FF, 241KF 
R  (Ref. TASK 53-22-12-400-001) (Ref. TASK 53-32-12-400-002). 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱2(70)