曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Modify it, if necessary, taking into account ATC constraints or expected gross weight
‐ Check and modify CRZ FL TEMP and tropopause level to agree with forecast
‐ Check latitude/longitude.
Applicable to:
,
,
MSN,,,,
* FLIGHT PLAN INITIALIZATION......................................................................................COMPLETE
‐ Press the INIT key
‐ Insert CO RTE or city pair, and check FROM/TO
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
STANDARD OPERATING PROCEDURES - COCKPIT PREPARATION
A318/A319/A320/A321 FLEET PRO-NOR-SOP-06 P 12/22
FCOM 19 AUG 10
‐ Check/modify ALTN/CO RTE
‐ Enter flight number
Note: For ATC needs, the crew should enter exactly the entire flight number, as shown on the
ICAO flight plan, without inserting any space, on the MCDU INIT SD page .
‐ Enter (and/or check) cost index
‐ Enter intended initial CRZ FL, or check if it was already supplied by the database.
Modify it, if necessary, taking into account ATC constraints or expected gross weight
‐ Check and modify CRZ FL TEMP and tropopause level to agree with forecast
‐ Enter (and/or check) the expected ground temperature for take off (GND TEMP)
‐ PRESS IRS INIT PAGE PROMPT SD page
‐ Check alignment latitude/longitude.
Applicable to:
* ADIRS POSITION INITIALIZATION....................................................................AS APPROPRIATE
‐ ADIRS position initialization involves setting the ADIRS navigation starting point. This is only
necessary for a complete or fast alignment.
‐ Press the ALIGN IRS prompt to send the coordinates displayed on the MCDU INIT SD page to the
three ADIRS.
‐ Use the defaulted departure airport reference point coordinates to initialize the ADIRS.
‐ When flying without GPS on long segments without radio coverage, it is better to use the gate
coordinates to initialize the ADIRS: To insert these coordinates, slew them on the MCDU, and then
press the ALIGN IRS prompt.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
STANDARD OPERATING PROCEDURES - COCKPIT PREPARATION
A318/A319/A320/A321 FLEET PRO-NOR-SOP-06 P 13/22
FCOM 19 AUG 10
Applicable to:
,
,
MSN,,
4538,,
* ADIRS POSITION INITIALIZATION....................................................................AS APPROPRIATE
ADIRS position initialization involves setting the ADIRS navigation ‐ starting point. This only occurs
for a complete or fast alignment. The ADIRS are automatically initialized using the GPS position,
without pilot intervention.
‐ If the GPS position is not available, the pilot manually initializes the ADIRS, by pressing the ALIGN
IRS prompt pb. This sends the coordinates displayed on the MCDU INIT page to the three ADIRS.
‐ When performing a manual initialization, use the defaulted departure airport reference point
coordinates. If flying long segments in poor radio NAVAID coverage airspace; it is better to use the
gate coordinates to initialize the ADIRS: To insert these coordinates, slew them on the MCDU, and
then press the ALIGN IRS prompt pb.
Applicable to:
, ,
MSN,,,,
* F-PLN A page...........................................................................................COMPLETE AND CHECK
If CO RTE has been inserted, the F-PLN should automatically include the preferential or probable
takeoff runway approach and landing runway, associated SIDs, STARs, transition and en-route
waypoints. However some databases will only include departure and arrival airport IDENTs and
en-route waypoints.
The flight crew must check, modify, or insert (as applicable) the F-PLN in the following order,
according to the data given by ATIS, ATC, or MET:
‐ Lateral revision at departure airport. Select RWY, then SID, then TRANS using scroll keys.
‐ Lateral revision at WPT for ROUTE modification if needed. (Refer to DSC-22_20-30-10-05 Lateral
Revisions).
‐ Vertical revision. Check or enter climb speed limit, constraints according to ATC clearance. Enter
step altitude as appropriate.
* WINDS.................................................................................................................AS APPROPRIATE
Enter the forecast wind for CLB or CRZ phases.(Refer to DSC-22_20-30-20-05 Flight Phases).
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
STANDARD OPERATING PROCEDURES - COCKPIT PREPARATION
A318/A319/A320/A321 FLEET PRO-NOR-SOP-06 P 14/22
FCOM 19 AUG 10
* F-PLN....................................................................................................................................CHECK
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320機組操作手冊FLIGHT CREW OPERATING MANUAL 11(132)