曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Power-up Page Display
Definition
Blank Line. G1000 system is not configured for ChartView. Contact a Garmin-authorized service center for configuration.
System is configured for ChartView but no chart database is installed. Contact Jeppesen for a ChartView database.
Normal operation. ChartView database is valid and within current cycle.
ChartView database is within 1 week after expiration date. A new cycle is available for update.
ChartView database is beyond 1 week after expiration date, but still within the 70 day viewing period.
ChartView database has timed out. Database is beyond 70 days after expiration date. ChartView database is no longer available for viewing.
System time is not available. GPS satellite data is unknown or G1000 has not yet locked onto satellites. Check database cycle number for effectivity.
System is verifying chart database when new cycle is installed for the first time.
After verifying, chart database is found to be corrupt. ChartView is not available.
Table 8-1 ChartView Power-up Page Annunciations and Definitions
454 Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 190-00494-02 Rev. B
Additional Features eatures
SYSTEM
OVERVIEW
FLIGHT
AUDIO PANEL EICAS INSTRUMENTS
& CNS
FLIGHT
MANAGEMENT
HAZARD
ADDITIONAL AFCS AVOIDANCE
INDEX APPENDICES FEATURES
Examples of four possible Power-up Page conditions are shown here. ChartView Disables plus a date in white, indicates chart data is current. This indication for normal operation shows how long the charts may be viewed. Chart data update available. in white, indicates the chart data cycle has expired within the past week and the next chart cycle is available. Chart data is out of date! in yellow, indicates charts are still viewable, but approaching the disable date. Chart data is disabled. in yellow, indicates the chart cycle has been disabled and is no longer viewable.
Figure 8-45 Examples of Power-up Page, ChartView DatabaseChart Cycle has Expired, Next Cycle is AvailableChartView Database is Current and AvailableChart Cycle has Expired but is Still Viewable for 70 Days from Expiration DateChart Cycle is No Longer Viewable
190-00494-02 Rev. B Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 455
Additional Features eatures
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS EICAS AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE AFCS ADDITIONAL
FEATURES APPENDICES INDEX
NOTE: A subdued softkey label indicates the function is disabled.
The ChartView time critical information can also be found on the AUX - System Status page. The database CYCLE number, EXPIRES, and DISABLES dates of the ChartView subscription appear in either blue or yellow text. When the ChartView EXPIRES date is reached, ChartView becomes inoperative 70 days later. This is shown as the DISABLES date. When the DISABLES date is reached, charts are no longer available for viewing. The SHW CHRT Softkey label then appears subdued and is disabled until a revised issue of ChartView is installed.
Select the DBASE Softkey for scrolling through the database information. Scroll through the database with the FMS knob or ENT Key.
The ChartView database cycle number shown in the figure, 0722, is deciphered as follows:
07 – Indicates the year 2007
22 – Indicates the 22nd issue of the ChartView database for the year
The EXPIRES date 15–NOV–07 is the date that this database should be replaced with the next issue.
The DISABLES date 24–JAN–08 is the date that this database becomes inoperative.
ChartView DataFigure 8-46 AUX – System Status Page, ChartView Current and AvailableDBASE Softkey Selected
The ChartView database is provided directly from Jeppesen. Refer to Updating Jeppesen Databases in Appendix B for instructions on revising the ChartView database.
456 Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 190-00494-02 Rev. B
Additional Features eatures
SYSTEM
OVERVIEW
FLIGHT
AUDIO PANEL EICAS INSTRUMENTS
& CNS
FLIGHT
MANAGEMENT
HAZARD
ADDITIONAL AFCS AVOIDANCE
INDEX APPENDICES FEATURES
The other three possible AUX - System Status page conditions are shown here. The EXPIRES date, in yellow, is the revision date for the next database cycle. The DISABLES date, in yellow, is the date that this database cycle is no longer viewable. REGION and CYCLE NOT AVAILABLE in blue, indicate that no ChartView data is available on the database card or no database card is inserted.
Figure 8-47 AUX – System Status Page, ChartView Expired, ChartView Disabled, ChartView Not AvailableChartView Database has Expired, but is not DisabledChartView Database is DisabledChartView Database is Not AvailableSystem is Configured for ChartView but Database is not Available
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Cessna Citation Mustang G1000 Integrated Flight Dec(157)