曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(See FIG 2-3-5.)
h. Runway Threshold Markings. Runway
threshold markings come in two configurations. They
either consist of eight longitudinal stripes of uniform
dimensions disposed symmetrically about the
runway centerline, as shown in FIG 2-3-1, or the
number of stripes is related to the runway width as
indicated in TBL 2-3-2. A threshold marking helps
identify the beginning of the runway that is available
for landing. In some instances the landing threshold
may be relocated or displaced.
TBL 2-3-2
Number of Runway Threshold Stripes
Runway Width Number of Stripes
60 feet (18 m) 4
75 feet (23 m) 6
100 feet (30 m) 8
150 feet (45 m) 12
200 feet (60 m) 16
AIM 2/14/08
2-3-4 Airport Marking Aids and Signs
1. Relocation of a Threshold. Sometimes
construction, maintenance, or other activities require
the threshold to be relocated towards the rollout end
of the runway. (See FIG 2-3-3.) When a threshold is
relocated, it closes not only a set portion of the
approach end of a runway, but also shortens the length
of the opposite direction runway. In these cases, a
NOTAM should be issued by the airport operator
identifying the portion of the runway that is closed,
e.g., 10/28 W 900 CLSD. Because the duration of the
relocation can vary from a few hours to several
months, methods identifying the new threshold may
vary. One common practice is to use a ten feet wide
white threshold bar across the width of the runway.
Although the runway lights in the area between the
old threshold and new threshold will not be
illuminated, the runway markings in this area may or
may not be obliterated, removed, or covered.
2. Displaced Threshold. A displaced threshold
is a threshold located at a point on the runway
other than the designated beginning of the runway.
Displacement of a threshold reduces the length of
runway available for landings. The portion of runway
behind a displaced threshold is available for takeoffs
in either direction and landings from the opposite
direction. A ten feet wide white threshold bar is
located across the width of the runway at the
displaced threshold. White arrows are located along
the centerline in the area between the beginning of the
runway and displaced threshold. White arrow heads
are located across the width of the runway just prior
to the threshold bar, as shown in FIG 2-3-4.
NOTEAirport
operator. When reporting the relocation or
displacement of a threshold, the airport operator should
avoid language which confuses the two.
i. Demarcation Bar. A demarcation bar delineates
a runway with a displaced threshold from a blast
pad, stopway or taxiway that precedes the runway. A
demarcation bar is 3 feet (1m) wide and yellow, since
it is not located on the runway as shown in
FIG 2-3-6.
1. Chevrons. These markings are used to show
pavement areas aligned with the runway that are
unusable for landing, takeoff, and taxiing. Chevrons
are yellow. (See FIG 2-3-7.)
j. Runway Threshold Bar. A threshold bar
delineates the beginning of the runway that is
available for landing when the threshold has been
relocated or displaced. A threshold bar is 10 feet (3m)
in width and extends across the width of the runway,
as shown in FIG 2-3-4.
2/14/08 AIM
Airport Marking Aids and Signs 2-3-5
FIG 2-3-3
Relocation of a Threshold with Markings for Taxiway Aligned with Runway
AIM 2/14/08
2-3-6 Airport Marking Aids and Signs
FIG 2-3-4
Displaced Threshold Markings
2/14/08 AIM
Airport Marking Aids and Signs 2-3-7
FIG 2-3-5
Runway Shoulder Markings
RUNWAY THRESHOLD
MIDPOINT OF
RUNWAY
SHOULDER RUNWAY SHOULDER
45
45
45
45
2-3-4. Taxiway Markings
a. General. All taxiways should have centerline
markings and runway holding position markings
whenever they intersect a runway. Taxiway edge
markings are present whenever there is a need to
separate the taxiway from a pavement that is not
intended for aircraft use or to delineate the edge of the
taxiway. Taxiways may also have shoulder markings
and holding position markings for Instrument
Landing System/Microwave Landing System (ILS/
MLS) critical areas, and taxiway/taxiway
intersection markings.
REFERENCEAIM,
Holding Position Markings, Paragraph 2-3-5.
b. Taxiway Centerline.
1. Normal Centerline. The taxiway centerline
is a single continuous yellow line, 6 inches (15 cm) to
12 inches (30 cm) in width. This provides a visual cue
to permit taxiing along a designated path. Ideally, the
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空信息手冊2008上(63)