曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

can be approved with little or no revision. These
abbreviated clearance procedures are based on the
following conditions:
1. The aircraft is on the ground or it has departed
visual flight rules (VFR) and the pilot is requesting
IFR clearance while airborne.
2. That a pilot will not accept an abbreviated
clearance if the route or destination of a flight plan
filed with ATC has been changed by the pilot or the
company or the operations officer before departure.
3. That it is the responsibility of the company or
operations office to inform the pilot when they make
a change to the filed flight plan.
4. That it is the responsibility of the pilot to
inform ATC in the initial call‐up (for clearance) when
the filed flight plan has been either:
(a) Amended, or
(b) Canceled and replaced with a new filed
flight plan.
NOTEThe
facility issuing a clearance may not have received the
revised route or the revised flight plan by the time a pilot
requests clearance.
b. Controllers will issue a detailed clearance when
they know that the original filed flight plan has been
changed or when the pilot requests a full route
clearance.
c. The clearance as issued will include the
destination airport filed in the flight plan.
d. ATC procedures now require the controller to
state the DP name, the current number and the DP
transition name after the phrase “Cleared to
(destination) airport” and prior to the phrase, “then as
filed,” for ALL departure clearances when the DP or
DP transition is to be flown. The procedures apply
whether or not the DP is filed in the flight plan.
e. STARs, when filed in a flight plan, are
considered a part of the filed route of flight and will
not normally be stated in an initial departure
clearance. If the ARTCC's jurisdictional airspace
includes both the departure airport and the fix where
a STAR or STAR transition begins, the STAR name,
the current number and the STAR transition name
MAY be stated in the initial clearance.
f. “Cleared to (destination) airport as filed” does
NOT include the en route altitude filed in a flight plan.
An en route altitude will be stated in the clearance or
the pilot will be advised to expect an assigned or filed
altitude within a given time frame or at a certain point
after departure. This may be done verbally in the
departure instructions or stated in the DP.
g. In both radar and nonradar environments, the
controller will state “Cleared to (destination) airport
as filed” or:
1. If a DP or DP transition is to be flown, specify
the DP name, the current DP number, the DP
transition name, the assigned altitude/flight level, and
any additional instructions (departure control frequency,
beacon code assignment, etc.) necessary to
clear a departing aircraft via the DP or DP transition
and the route filed.
EXAMPLENational
Seven Twenty cleared to Miami Airport
Intercontinental one departure, Lake Charles transition
then as filed, maintain Flight Level two seven zero.
2. When there is no DP or when the pilot cannot
accept a DP, the controller will specify the assigned
altitude or flight level, and any additional instructions
necessary to clear a departing aircraft via an
appropriate departure routing and the route filed.
NOTEA
detailed departure route description or a radar vector
may be used to achieve the desired departure routing.
3. If it is necessary to make a minor revision to
the filed route, the controller will specify the assigned
DP or DP transition (or departure routing), the
revision to the filed route, the assigned altitude or
flight level and any additional instructions necessary
to clear a departing aircraft.
EXAMPLEJet
Star One Four Two Four cleared to Atlanta Airport,
South Boston two departure then as filed except change
route to read South Boston Victor 20 Greensboro, maintain
one seven thousand.
4. Additionally, in a nonradar environment, the
controller will specify one or more fixes, as
necessary, to identify the initial route of flight.
EXAMPLECessna
Three One Six Zero Foxtrot cleared to Charlotte
Airport as filed via Brooke, maintain seven thousand.
AIM 2/14/08
5-2-4 Departure Procedures
h. To ensure success of the program, pilots should:
1. Avoid making changes to a filed flight plan
just prior to departure.
2. State the following information in the initial
call‐up to the facility when no change has been made
to the filed flight plan: Aircraft call sign, location,
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空信息手冊2008上(178)