8.
Place: ........................................................

9.
Date: ........................................................

Note (1) : A note giving the address(es) to which the Form(s) should be sent. Note (2) : An optional note to give information on any fees payable.
* delete as applicable
ED 2010/002/R
EASA Form 2 Page 1 of 2

ED 2010/002/R
SCOPE OF APPROVAL AVAILABLE
CLASS AIRCRAFT  RATING  LIMITATION  BASE  LINE 
A1 Aeroplanes above 5700 kg  [Rating reserved to Maintenance Organisations approved in accordance with Annex II (Part-145)] [State aeroplane manufacturer or group or series or type and/or the maintenance tasks] Example: Airbus A320 Series  [YES/ NO]*  [YES/ NO]* 
A2 Aeroplanes 5700 kg and below  [State aeroplane manufacturer or group or series or type and/or the maintenance tasks] Example: DHC-6 Twin Otter Series  [YES/ NO]*  [YES/ NO]* 
A3 Helicopters  [State helicopter manufacturer or group or series or type and/or the maintenance task(s)] Example: Robinson R44  [YES/ NO]*  [YES/ NO]* 
A4 Aircraft other than A1, A2 and A3  [State aircraft series or type and/or the maintenance task(s).]  [YES/ NO]*  [YES/ NO]* 
ENGINES  B1 Turbine  [State engine series or type and/or the maintenance task(s)]  Example: PT6A Series 
B2 Piston  [State engine manufacturer or group or series or type and/or the maintenance task(s)] 
B3 APU  [State engine manufacturer or series or type and/or the maintenance task(s)] 
COMPONENTS OTHER THAN COMPLETE ENGINES OR APUs  C1 Air Cond & Press  [State aircraft type or aircraft manufacturer or component manufacturer or the particular component and/or cross refer to a capability list in the exposition and/or the maintenance task(s).] Example: PT6A Fuel Control 
C2 Auto Flight 
C3 Comms and Nav 
C4 Doors – Hatches 
C5 Electrical Power & Lights 
C6 Equipment 
C7 Engine – APU 
C8 Flight Controls 
C9 Fuel 
C10 Helicopter – Rotors 
C11 Helicopter – Trans 
C12 Hydraulic Power 
C13 Indicating -recording system 
C14 Landing Gear 
C15 Oxygen 
C16 Propellers 
C17 Pneumatic & Vacuum 
C18 Protection ice/ rain/fire 
C19 Windows 
C20 Structural 
C21 Water ballast 
C22 Propulsion Augmentation 
SPECIALISED SERVICES  D1 Non Destructive Testing  [State particular NDT method(s)] 

Part-M Appendix X to AMC M.B.602 (a) and AMC M.B.702 (a) EASA Form 4
Appendix X to AMC M.B.602 (a) and AMC M.B.702 (a) EASA Form 4
COMPETENT AUTHORITY Details of Management Personnel required to be accepted as specified in Part-………………… 1. Name: 2. Position: 3. Qualifications relevant to the item (2) position: 4. Work experience relevant to the item (2) position: Signature: ............................... Date: ...................................... On completion, please send this form under confidential cover to the competent authority 
Competent authority use only Name and signature of authorised competent authority staff member accepting this person: Signature: ............................................... Date: .............................................. Name: ..................................................... Office: ............................................. 

ED 2010/002/R
EASA Form 4

ED 2010/002/R
Appendix XI to AMC to M.A.708 (c)
CONTRACTED MAINTENANCE
1. Maintenance contracts
The following paragraphs are not intended to provide a standard maintenance con-tract but to provide a list of the main points that should be addressed, when appli-cable, in a maintenance contract between an Operator and a Part-145 approved organisation. As only the technical parts of the maintenance contracts have to be acceptable to the competent authority, the following paragraphs only address tech-nical matters and exclude matters such as costs, delay, warranty, etc...
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：CONTINUING AIRWORTHINESS REQUIREMENTS – PART M 2(70)