- 148 -
01-00-00
737-600/700/800/900 TRAINING MANUAL
01-00-00-001 Rev 1 02/08/2002
SCHEDULED MAINTENANCE UNSCHEDULED MAINTENANCE
- THROUGH STOP - TURN AROUND - DAILY - PLANNED CHECKS - STRUCTURAL DAMAGE - FLIGHT FAULTS - GROUND FAULTS - SERVICE PROBLEMS - FLIGHT FAULTS
MAINTENANCE PLANNING DATA DOCUMENT STRUCTURAL REPAIR MANUAL FAULT MANUAL REPORTING
BOEING 737 AND INDEXES TASK CARDS MAINTENANCE TIPS DISPATCH DEVIATION GUIDE
SUPPORTING DATA AIRPLANE MAINTENANCE MANUAL FAULT MANUAL ISOLATION JOB COMPLETE
SYSTEM SCHEMATICS MANUAL WIRING DIAGRAM MANUAL ILLUSTRATED PARTS CATALOG STANDARD WIRING PRACTICES MANUAL
MAINTENANCE DOCUMENTS - INTRODUCTION
- 149 -
01-00-00
737-600/700/800/900 TRAINING MANUAL MAINTENANCE DOCUMENTS -- MAINTENANCE PLANNING DATA DOCUMENT General
The 737 Maintenance Planning Data Document gives operators general information about scheduled maintenance for the 737-600/700/800 airplane. Operators use it to develop a scheduled maintenance program. The Maintenance Planning Data Document has these sections:
-Introduction
-Airline Dimensions
-Zone Diagrams
-Access Doors and Panels
-Lubrication and Filters
-Systems Maintenance Program
-Structural Inspection Program
-Component Information
-Corrosion Prevention and Control Programs
-Appendix A - Maintenance Program Man-Hours
-Appendix B - Highlights.
The maintenance steering group three analyzes each part. It chooses the most logical way to track the part; for example, time or cycles. The results of the analysis are in the Maintenance Requirements Review and Proposal Document.
The maintenance requirements review board uses the analysis to make a report. The Maintenance Planning Data Document is made from this document. The airline scheduled maintenance program and airline job cards come from the Maintenance Planning Data Document.
- 150 -
01-00-00
737-600/700/800/900 TRAINING MANUAL
01-00-00-203 Rev 1 11/17/1997
737-6/7/800
MAINTENANCE
MAINTENANCE REQUIREMENTS
STEERING REVIEW
GROUP 3 &
ANALYSIS PROPOSAL
DOCUMENT
Vol 1-9
ATA
737-6/7/800
MRB
REPORT
737-6/7/8
MAINTENANCE MANUAL BOEING 737 TASK CARDS MAINTENANCE PLANNING
BOEING AND INDEXES BOEING DATA DOCUMENT FAA
MAINTENANCE BOEING
MANUAL
AIRLINE
MAINTENANCE AIRLINE
SERVICE LETTERS PROGRAM JOB
AIRWORTHINESS DIRECTIVES CARDS
VENDOR MANUALS SERVICE BULLETINS AIRLINE AIRLINE
MAINTENANCE DOCUMENTS - MAINTENANCE PLANNING DATA DOCUMENT
01-00-00
MAINTENANCE DOCUMENTS -- FAULT REPORTING MANUAL General
The fault reporting manual (FRM) gives the flight crew a simple list of fault descriptions. Each fault description has a fault code.
When the flight crew finds a problem on the airplane, they look for the description of the fault indication in the FRM. They write the fault description and the fault code in the log book. They can also send the information to a ground station so maintenance personnel can prepare before the airplane arrives.
The FRM has these sections:
-Observed faults
-Cabin faults.
Observed Faults
The OBSERVED FAULTS section is an alphabetical list of fault descriptions for malfunctions that the flight crew or ground service crew can see. These are some examples of observed faults:
-Flap lever difficult to operate
-Tire number 3 is worn.
This information is also in the FIM. The FIM also has a FIM task number. See the section on the FIM for more information.
737-600/700/800/900 TRAINING MANUAL
Cabin Faults 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737-600/700/800/900培訓手冊 TRAINING MANUAL 1(31)
