曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 No. 3 bearing.
 2)  Remove the bolts (141, 144) and nuts (142, 145) which attach the clamp (143) to the bracket on the lubrication and scavenge oil pump.
 3)  Remove the bolts (146, 148) and nuts (147, 149) which attach the clamp (150) to the bracket between the fuel injector No.12 and 13.
 4)  Put the 5 gallon (19 liter) container below the lubrication and scavenge oil pump.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 73-11-05
 ALL  ú ú N01 Page 433 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
5)  Disconnect the tube nut (136) from the diffuser case fitting.
 6)  Remove the bolts (139) which attach the oil scavenge hose and manifold assembly (135) and the bracket (138) to the fluid pressure dampener (ENGINES PRE-PW-SB 79-86) or to the adapter assembly (ENGINES POST-PW-SB 79-86), which is mounted on the top of the lubrication and scavenge oil pump. a) Let the oil drain into the container.
 7)  Remove the oil scavenge hose and manifold assembly (135) from the engine. a) Discard the packing (137).
 8)  Install caps on the diffuser case fitting and the open port on the lubrication and scavenge oil pump.
 (g)  
Put the container below the fuel manifold (4).

 (h)  
Disconnect the supply tube (1) from the fuel manifold (4).

 (i)  
Disconnect the fuel manifold (4) from all three fuel injectors (5).

 (j)  
Remove the fuel manifold (4) from the engine. 1) Install caps on the openings of the fuel manifold (4). 2) Discard the packings (20).

 (k)  
Remove the transfer tube (2) from the supply tube (1).

 (l)  
Discard the packings (3) from the transfer tube (2).

 (m)  
Remove the bolts (21) which attach the fuel injector (5) to the diffuser and combustor case.

 (n)  
Remove the fuel injector (5) and the gasket (19) from the engine.

 NOTE: Turn or lift the fuel injector, as it is necessary, to
____ disengage the fuel injector from the diffuser and combustor case.
 1)  Discard the gasket (19).
 (o)  Install caps on the open end of the supply tube (1) and the opening in the diffuser and combustor case.
 TASK 73-11-05-004-086-N00
 7.  Remove the No. 16, 17, or 18 Fuel Injector and Support (Fig. 401)______________________________________________________
 A.  Standard Tools and Equipment
 (1) Container - 1 quart (1 liter) capacity, used to collect the fuel
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-11-05
 ALL  ú ú N01 Page 434 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
B. References
 (1)  
AMM 71-11-04/201, Fan Cowl Panels

 (2)  
AMM 71-11-06/201, Core Cowl Panels

 (3)  
AMM 78-31-00/201, Thrust Reverser System

 (4)  
AMM 79-11-01/401, Oil Tank

 C.
Access

 (1)  
Location Zone 412 Engine 1 - Diffuser and Combustor Case 8 o'clock 422 Engine 2 - Diffuser and Combustor Case 8 o'clock 432 Engine 3 - Diffuser and Combustor Case 8 o'clock 442 Engine 4 - Diffuser and Combustor Case 8 o'clock

 (2)  
Access Panel
 415 Left Thrust Reverser Half - Engine 1
 425 Left Thrust Reverser Half - Engine 2
 435 Left Thrust Reverser Half - Engine 3
 445 Left Thrust Reverser Half - Engine 4

 D.
Prepare to Remove the No. 16, 17 or 18 Fuel Injector and Support

 S 864-087-N00
 (1)  Make sure the applicable FUEL CONTROL switch is in the CUTOFF position.
 S 864-088-N00
 WARNING: MAKE SURE YOU OPEN THE CIRCUIT BREAKERS FOR THE ENGINE IGNITION
_______ BEFORE YOU OPEN THE FUEL CONT VALVE. THE IGNITER PLUGS WILL AUTOMATICALLY FIRE IF YOU ARE OUT OF ZERO DETENT, NACELLE ANTI-ICE IS ON, CON IGNITION SWITCH IS SET TO "ON", OR ENGINE START SWITCH IS PULLED TO "ON". IF THE COMBUSTION CHAMBER HAS FUEL IN IT, AN INTERNAL ENGINE OR A TAILPIPE FIRE CAN OCCUR. THE FIRE CAN CAUSE INJURY TO PERSONS OR DAMAGE TO THE ENGINE.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機燃油和控制 1(56)