E.
Procedure
S 024-435-N00
(1)
Remove the No. 4, 5 or 6 fuel injector and support.
(a)
If you will remove the No. 4 or 5 fuel injector, remove the bolts (32), nuts (31), and washers (30) which attach the triangle support (29) to the brackets (17, 18).
(b)
If you will remove the No. 5 fuel injector, remove the bolt (28) and nut (27) which attach the turnbuckle (26) to the bracket (16).
(c)
If you will remove the No. 6 fuel injector, remove the bolt (36) and nut (38) which attach the turnbuckle (37) to the bracket (15).
(d)
Put the container below the fuel manifold (4).
(e)
Disconnect the supply tube (1) from the fuel manifold (4).
(f)
Disconnect the fuel manifold (4) from all three fuel injectors (5).
(g)
Remove the fuel manifold (4) from the engine. 1) Install caps on the openings in the fuel manifold. 2) Discard the packings (20).
(h)
Remove the transfer tube (2) from the supply tube (1). 1) Discard the packings (3) from the transfer tube (2).
(i)
For the No. 4 fuel injector, remove the bolts (21) which attach the fuel injector (5) and the bracket (18) to the diffuser and combustor case.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-05
ALL ú ú N01 Page 412 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(j)
For the No. 5 fuel injector, remove the bolts (21) which attach the fuel injector (5) and the bracket (16, 17) to the diffuser and combustor case.
(k)
For the No. 6 fuel injector, remove the bolts (21) which attach the fuel injector (5) and the bracket (15) to the diffuser and combustor case.
(l)
Remove the fuel injector (5), the bracket (15, 16, 17 or 18) and the gasket (19) from the engine.
NOTE: Turn or lift the fuel injector, as it is necessary, to
____ disengage the fuel injector from the diffuser and combustor case.
1) Discard the gasket (19).
(m) Install caps on the open end of the supply tube (1) and the opening in the diffuser and combustor case.
TASK 73-11-05-004-033-N00
4. Remove the No. 7, 8, or 9 Fuel Injector and Support (Fig. 401)
___________________________________________________
A. Standard Tools and Equipment
(1)
Container - 1 quart (1 liter) capacity, used to collect the fuel
B.
References
(1)
AMM 71-11-04/201, Fan Cowl Panels
(2)
AMM 71-11-06/201, Core Cowl Panels
(3)
AMM 75-24-02/401, Turbine Vane Cooling Air Duct
(4)
AMM 78-31-00/201, Thrust Reverser System
C.
Access
(1)
Location Zone 412 Engine 1 - Diffuser and Combustor Case 4 o'clock 422 Engine 2 - Diffuser and Combustor Case 4 o'clock 432 Engine 3 - Diffuser and Combustor Case 4 o'clock 442 Engine 4 - Diffuser and Combustor Case 4 o'clock
(2)
Access Panel
416 Right Thrust Reverser Half - Engine 1
426 Right Thrust Reverser Half - Engine 2
436 Right Thrust Reverser Half - Engine 3
446 Right Thrust Reverser Half - Engine 4
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-05
ALL ú ú N01 Page 413 ú Feb 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
D. Prepare to Remove the No. 7, 8 or 9 Fuel Injector and Support
S 864-034-N00
(1) Make sure the applicable FUEL CONTROL switch is in the CUTOFF position.
S 864-035-N00
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機燃油和控制 1(48)
