(2)
AMM 70-23-00/201, Tightening Techniques and Torque Values

 (3)
AMM 70-31-01/201, Fluorescent Penetrant Inspection

 (4)
AMM 71-11-04/201, Fan Cowl Panels

 (5)
AMM 71-11-04/401, Fan Cowl Panels

 (6)
AMM 71-21-00/601, Engine Mounts

 (7)
AMM 78-31-00/201, Thrust Reverser System

 F.
Access

 (1)  
Location Zone
 412 Engine 1
 422 Engine 2
 432 Engine 3
 442 Engine 4
 452 Strut No. 1 - Torque Box
 462 Strut No. 2 - Torque Box
 472 Strut No. 3 - Torque Box
 482 Strut No. 4 - Torque Box

 (2)  
Access Panel 452JL Core Cowl Skirt Mid Fairing - Strut 1, Left Side 452JR Core Cowl Skirt Mid Fairing - Strut 1, Right Side 462JL Core Cowl Skirt Mid Fairing - Strut 2, Left Side 462JR Core Cowl Skirt Mid Fairing - Strut 2, Right Side 472JL Core Cowl Skirt Mid Fairing - Strut 3, Left Side 472JR Core Cowl Skirt Mid Fairing - Strut 3, Right Side 482JL Core Cowl Skirt Mid Fairing - Strut 4, Left Side 482JR Core Cowl Skirt Mid Fairing - Strut 4, Right Side

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-00-02
 ALL  ú ú N01 Page 467 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
G. Prepare for the Installation of the Power Plant
 S 864-102-N00
 (1)  
Make sure the airplane is in the configuration from the Prepare for the Power Plant Removal procedure.

 S 234-052-N00

 (2)  
Get new vertical tension bolts (1, 2, and 12) or ones which are examined (Fig. 411).

 (a)  
Do a fluorescent penetrant inspection of the vertical tension bolts (1, 2, and 12) (AMM 70-31-01/201).

 (b)  
Examine the threads of the vertical tension bolts (1, 2, and 12) to make sure you can apply a satisfactory locking torque when used with a satisfactory nut.

 (c)  
Discard all vertical tension bolts (1, 2, and 12) with damage which you can feel with a fingernail or thread damage you can see.

 S 644-103-N00
 (3)  
Apply the antiseize compound to the threads and the shanks of the vertical tension bolts (1, 2, and 12) (Fig. 411).

 S 214-104-N00

 (4)  
Make sure you can tighten the self-locking torque of the barrel nuts (5) to a minimum of 70 pound-inches (7.9 newton-meters) (Fig. 411).

 (a)  If the barrel nut cannot hold the minimum torque, replace and examine again the self-locking torque.
 S 214-178-N00
 (5)  
Make sure you can tighten the self-locking torque of the nuts (9) to a minimum of 70 pound-inches (7.9 newton-meters) (Fig. 411).

 (a)  If the nut cannot hold the minimum torque, replace and examine again the self-locking torque.

 (6)  
Examine the engine mounts (AMM 71-21-00/601).

 S 214-053-N00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-00-02
 ALL  ú ú N07 Page 468 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(7)  S 214-105-N00Make sure the mating surfaces of the forward and aft engine mounts do not have oil, grease, and other unwanted material.
 (8)  S 644-106-N00Apply the antiseize compound to the shear pins on the forward and aft engine mounts (Fig. 411).
 (9)  S 214-107-N00Examine the wire bundles in the support beam for the fan cowl for damage and to make sure they are tight.
 S 024-110-N00

 (10) If they are installed, open the fan cowl panels (AMM 71-11-04/201).
 S 044-120-N00 WARNING: DO THE THRUST REVERSER DEACTIVATION PROCEDURE TO PREVENT THE
_______ OPERATION OF THE THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
 (11) Do this procedure:  Thrust Reverser Deactivation for Ground Maintenance (AMM 78-31-00/201).
 S 014-123-N00 WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00 WHEN YOU OPEN THE THRUST
_______ REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 動力裝置 POWER PLANT 2(9)