(13)
 Install the hold-open equipment (A78001) for the thrust reverser with the steps that follow, if it is not installed (Fig. 402):

 (a)  Put the actuator lock (2) on the actuator rod (5).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-00-02
 ALL  ú ú N06 Page 469 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
(b)  Make sure the lock yoke (7) is against the bolt (6) that
 attaches the actuator rod (5).
 (c)  Make sure the lock channel (4) is against the actuator
 cylinder.
 (d)  Put the channel clamp (3) around the actuator rod (5).
 (e)  Tighten the knurled-head screw (8) to attach the channel
 clamp (3) to the actuator rod (5).
 (f)  Let the actuator close a small distance to remove the load from
 the actuator (1).
 NOTE:____ This will move the load from the actuator (1) to the
 actuator lock (2).
 (g)  Put the hold-open equipment in the stowed position.

 S 494-000-N00
 (14) Remove the fan cowl panels (AMM 71-11-04/401) or install the hold-open equipment (A71030) for the fna cowl with the steps that follow, if it is not installed:
 (a)  If you use the hold-open equipment (A71030), do the steps that follow (Fig. 404): 1) Assemble the hold-open equipment (1) on the ground. 2) Put the hold-open equipment (1) on the forward edge of the
 fan cowl panels. 3) Tighten the screw clamps (2). 4) Make sure the hold-open equipment does not touch the
 support structure of the fan cowl. 5) Put the hold-open rods for the fan cowl panel in the stowed position.
 (b)  If you use the hold-open equipment (G71023) for the fan and core cowl panels, do the subsequent step.
 S 494-002-N00
 (15) If you use the hold-open equipment (G71023) for the fan and core cowl to hold the fan and core cowl panels open (Fig. 404), do the steps that follow:
 (a)  Install the thrust reverser tube and the attached parts on the thrust reversers (View B or E). 1) Engage the hook on the thrust reverser tube to the loop on
 the thrust reverser.
 NOTE: Make sure the pin on the thrust reverser engages
____ the pin hole on the thrust reverser tube. Or make sure the pin on the thrust reverser tube engages the pin hole on the thrust reverser.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 71-00-02
 ALL  ú ú N07 Page 470 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
2)  Engage the loop on the thrust reverser tube to the hook on the thrust reverser.
 NOTE: Make sure the pin on the thrust reverser engages
____ the pin hole on the thrust reverser tube. Or make sure the pin on the thrust reverser tube engages the pin hole on the thrust reverser.
 3)  Tighten the knobs on the thrust reverser tube to attach the tube to the thrust reverser.
 (b)  Install the forward tube assembly on the fan cowl panel (View A or D). 1) Turn the forward tube to engage the tube end to the thrust
 reverser tube. 2) For the left fan cowl panel, do the steps that follow: a) Engage the hook on the left fan cowl tube to the loops on the fan cowl panel.
 NOTE: Make sure the pins on the fan cowl panel engage
____ the pin holes on the fan cowl tube.
 b) Tighten the knobs on the fan cowl tube to attach the tube to the fan cowl panel. 3) For the right fan cowl panel, do the steps that follow: a) Engage the hooks on the fan cowl tube to the loops on the right fan cowl panel.
 NOTE: Make sure the pins on the fan cowl tube engage
____ the pin holes on the fan cowl panel.
 b) Close the fan cowl latch. c) Tighten the knobs on the fan cowl tube to attach it to the fan cowl panel. 4) Put the lockpin into the pin hole on the thrust reverser tube.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 動力裝置 POWER PLANT 2(10)