曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

______________________________________________
 1.  General_______
 A.  This procedure contains the tasks to remove and install the support block for the cone bolt. The support block is a receptacle for the cone bolt on the aft shockmount. The support block connects to the links on the APU. It is necessary to hold the APU with a fishpole hoist and a sling to remove the support block.
 B.  The support block for the cone bolt is on the top aft side of the APU. You can get access to the support block through the APU access doors.
 TASK 49-13-06-004-001
 2.  Cone Bolt Support Block Removal (Fig. 401, Fig. 402)_______________________________
 A.  References
 (1)  
AMM 49-13-05/401, Aft Shockmount

 B.  
Equipment

 (1)  
PF51-002-1 Hoist - Fishpole, Manual Powered
 06714 P. F. Industries Inc.
 151 S. Michigan St., Seattle, WA 98108-3225 or

 (2)  
AP6108 Hoist - Fishpole, Advanced Chain-Driven
 Morgan Aero Products
 2719 Pacific Avenue, Everett, WA 98201

 (3)  
2OHME65B00780-1 Sling - APU Rear Mount

 C.  
Access

 (1)  
Location Zones
 221 Control Cabin - Left
 222 Control Cabin - Right
 310 Fuselage - Station 2360 to Station 2792

 (2)  
Access Panels
 317AL APU Access Door - Left
 318AR APU Access Door - Right

 D.  
Procedure

 S 864-002
 (1)  
Make sure the APU control switch on the P5 panel is OFF and attach a DO-NOT-OPERATE tag.

 S 864-003

 (2)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P6 Main Power Supply Panel
 1) 6K18 APU ALTN CONT

 (b)  
P83 Panel, E8 Aft Equipment Center
 1) APU PRIMARY CONT

 

 S 014-004
 (3)  
Open the APU access doors:

 (a)  
Open the latches on the APU access doors.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-13-06
 ALL  ú ú 01 Page 401 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
STRUCTURAL SEE A
STA 2733.89
STRUCTURAL STA 2725.13
SEE B KEYHOLE SLOT
INBD 
SEE  C  FWD  HOIST FISHPOLE  CABLE HOIST 

A
FISHPOLE HOIST REAR MOUNTCABLE SLING
APU GROUND CLEVIS HANDLING LUG
CLEVIS
APU STAND
REAR ASSEMBLY REAR
MOUNT YOKE ATTACH
SLING POINT
C
B
Fishpole Hoist and APU Rear Mount Sling Installation Figure 401
F58191
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-13-06
 ALL  ú ú 02 Page 402 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
SEE A AFT SHOCKMOUNTAFT SHOCKMOUNT (REF)
1. CONE BOLT SUPPORT BLOCK  BOLT NUT 3. 4. (2 LOCATIONS) 2. BUSHING WASHER (QTY 2) 5.  BOLT NUT 3. 4. 5. (2 LOCATIONS) 2. BUSHING WASHER (QTY 2) 
(2 LOCATIONS) LINK8.  6. WASHER  8. (2 LOCATIONS) LINK  7.  6.  WASHER  CONE BOLT BLOCK SUPPORT 
7. NUT 
A  1  A  2 
1  OPTIONAL TO 2 LORD MANUFACTURING COMPANY-
2  BARRY CONTROLS-OPTIONAL TO 1 
Figure 402 Cone Bolt Support Block Installation 

F58193
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-13-06
 ALL  ú ú 02 Page 403 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (b)  
Open the APU access doors.

 (c)  
Engage the support rods for the APU access doors.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 1(76)