49-15-06
 ALL  ú ú 03 Page 402 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (d)  
Remove the T1/T6 sensor (AMM 49-61-05/401), if necessary.

 (e)  
Remove the bolts (1) and nuts (2) that attach the left screen to the right screen.

 (f)  
Remove the bolts (4), washers (5) on the front and rear of the left plenum and threaded end rods (3) from the left inlet screen (9).

 (g)  
Remove the nuts (6), bolts (8), washers (7) and a half washer (10) from the lower front and rear of the left plenum and at the bottom of the left inlet screen (9).

 CAUTION: MAKE SURE YOU CAREFULLY REMOVE THE LEFT INLET SCREEN FROM
_______ THE LEFT PLENUM. DAMAGE CAN OCCURE TO INLET SCREEN.
 (h)  Remove the left inlet screen (9) from the left plenum.
 S 024-009
 (3)
Do the steps that follow to remove the right inlet screen (9):

 (a)  
Disconnect the P6 ignition cable and electrical connector (AMM 49-41-03/401), if necessary. 1) Remove the ignition exciter (AMM 49-41-03/401), if

 necessary.

 (b)  
Loosen the fastener studs from the lower right door for the air inlet. 1) Remove the lower right door for the air inlet.

 (c)  
Remove the bolts (4), washers (5) on the front and rear of the right plenum and threaded end rods (3) from the right inlet screen (9).

 (d)  
Remove the nuts (6), bolts (8), washers (7) and a half washer (10) from the lower front and rear of the right plenum and at the bottom of the right inlet screen (9).

 CAUTION: MAKE SURE YOU CAREFULLY REMOVE THE RIGHT INLET SCREEN FROM
_______ THE RIGHT PLENUM. DAMAGE CAN OCCURE TO INLET SCREEN.
 (e)  Remove the right inlet screen (9) from the right plenum.
 TASK 49-15-06-404-003
 3. Air Inlet Screen Installation (Fig. 401)
_____________________________
 A. Consumable Materials
 (1)  D00511 Oil-Engine
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 49-15-06
 ALL  ú ú 02 Page 403 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)
C00502 Primer-Mil-S-22473, Locquic, Grade N or T

 (3)
A00425 Loctite 222

 B.
Reference

 (1)
AMM 49-11-01/401, Auxiliary Power Unit

 (2)
AMM 49-41-03/401, Ignition Exciter

 (3)
AMM 49-52-03/401, Inlet Guide Vane Actuator

 (4)
AMM 49-61-05/401, Air Temperature Sensors

 (5)
AMM 49-61-06/401, Inlet Pressure Sensor

 C. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 9 | Air Inlet Screen | 49-51-04 | 02 | 143 | 2.......….......…...................................…...........…......….......1
 D. Access
 (1)  
Access Panel
 317AL APU Access Door
 318AR APU Access Door

 E.
Procedure

 S 424-007
 CAUTION: MAKE SURE YOU DO NOT HIT THE INLET PLENUM WITH YOUR HANDS OR
_______ TOOLS. IT CAN CAUSE DAMAGE TO THE COMPOSITE MATERIAL.
 MAKE SURE YOU DO NOT LEAN OR SIT ON THE INLET PLENUM WHEN YOU INSTALL THE INLET SCREEN. IT CAN CAUSE DAMAGE TO THE COMPOSITE MATERIAL.
 MAKE SURE YOU COLLECT ALL REMOVED ITEMS. LOOSE ITEMS CAN CAUSE INTERNAL DAMAGE TO THE APU.
 (1)
Do the steps that follow to install the right inlet screen:

 (a)
Put the right inlet screen (9) in the right plenum.

 (b)
Lubricate the bolts threads and washers with the engine oil.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 1(127)