32-61-20
 ALL  ú ú 01 Page 406 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 WING GEAR UPLOCK SENSORS - MAINTENANCE PRACTICES
________________________________________________
 1.  General_______
 A.  This procedure contains five tasks. These tasks remove, install, adjust and test the uplock sensors for the wing landing gear. Two tasks apply to the sensor adjustment. One task is for the airplane not on jacks, and one task is for the airplane on jacks.
 B.  The primary (S398, left gear; S404, right gear) and the alternate (S1638, left gear; S1639, right gear) uplock sensors attach to the uplock mechanism adjacent to the uplock hook.
 TASK 32-61-21-002-001
 2.  Remove the Uplock Sensor for the Wing Gear__________________________________________
 A.  Standard Tools and Equipment
 (1)
Plastic Scraper - that is not abrasive, that is not a conductor

 B.  
References

 (1)  
09-11-00/201, Towing

 (2)  
32-00-30/201, Landing Gear Door Locks

 (3)  
32-09-02/201, Air/Ground Relay System

 (4)  
WDM 32-61-14, Left Wing Gear Primary Display
 WDM 32-61-17, Right Wing Gear Primary Display

 (5)  
WDM 32-61-23, Left Wing Gear Alternate Display
 WDM 32-61-26, Right Wing Gear Alternate Display

 C.  
Access

 (1)  
Location Zone
 135 Wing Landing Gear Wheel Well, LH
 136 Wing Landing Gear Wheel Well, RH

 D.  
Prepare for the Removal

 S 492-002
 (1)  Make sure the ground locks for the wing landing gear are installed (AMM 09-11-00/201).
 S 492-054
 WARNING:_______OBEY THE INSTALLATION PROCEDURE FOR THE DOOR LOCKS. THE DOORS OPEN AND CLOSE QUICKLY. THE MOVEMENT OF THE DOORS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (2)  Install the door locks on the main landing gear (AMM 32-00-30/201).
 S 042-055
 WARNING: MAKE SURE YOU PREPARE THE AIRPLANE FOR THE AIR MODE BEFORE YOU
_______ OPEN THE CIRCUIT BREAKERS THAT FOLLOW. THE AUTOMATIC OPERATION OF THE AIRPLANE SYSTEMS IN THE AIR MODE CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (3)  Prepare the airplane for the air mode (Ref 32-09-02/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-61-21
 ALL  ú ú 01 Page 201 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 862-005
 (4)  
For the alternate sensor removal, open this circuit breaker on the overhead circuit breaker panel, P7, and attach a DO-NOT-CLOSE tag:

 (a)  
7F23, LANDING GEAR DSP & CONT ALTN

 S 862-006
 (5)  
For the primary sensor removal, open this circuit breaker on the overhead circuit breaker panel, P7, and attach a DO-NOT-CLOSE tag:

 (a)  
7F22, LANDING GEAR DSP & CONT PRI

 E.
Remove the Uplock Sensor (Fig. 201)

 S 012-007
 (1)  
Remove the cover from the junction box (J18, left gear; J21, right gear).

 S 032-056

 (2)  
Disconnect the sensor wires:

 (a)  
Remove the sealant from the electrical terminals with the plastic scraper.

 (b)  
Make a note of the terminal locations and the wire color for the sensor wire installation.

 (c)  
Remove the sensor wires from the terminal strip.

 (d)  
Carefully remove the terminal lugs (8) from the sensor wires.

 (e)  
Prepare a line that is longer than the conduit.

 NOTE: You will use this line to pull the sensor wires through
____ the conduit, during the installation.
 (f)  Attach the line to the sensor wires.
 S 022-008
 (3)  
Remove the uplock sensor (3):

 (a)  
Remove the conduit nut (4).
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 9(97)