B.  
References

 (1)  
AMM 25-59-01/401, Main Deck Compartment Cargo Lining Panel

 (2)  
AIPC 27-62-09, Fig. 1

 C.  
Access

 (1)  
Location Zone 211, 212 Passenger Cabin - Nose to First Door

 D.  
Procedure

 (1)  
Put the speed brake lever in the DOWN position.

 S 864-003

 (2)
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P7, Overhead Circuit Breaker Panel
 1) 7G7, SPEED BRAKE FLT DETENT

 S 864-002
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-62-08
 ALL  ú ú 04 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 014-023
 (3)  
Remove the third center ceiling panel forward of the main entry door No. 1: (AMM 25-59-01/401).

 S 024-004

 (4)  
Remove the control lever lock:

 (a)  
Disconnect the electrical wire from the solenoid.

 (b)  
Remove the pin that attaches the link on the solenoid to the lever crank.

 (c)  
Use the internal hex wrench to remove the retaining nut from the stop lever.

 (d)  
Remove the stop lever crank.

 (e)  
Remove the booster spring from the stop lever: 1) Remove the screw and spacer that attach the lower end of

 the spring. 2) Disconnect the spring from the stop lever.

 (f)  
Remove the bearing housings, spacer and stop lever.

 (g)  
Remove the bolts and remove the solenoid from the mounting bracket.

 TASK 27-62-08-404-005
 3.  Speed Brake Control Lever Lock Installation (Fig. 401)___________________________________________
 A. Special Tools and Equipment
 (1)  
ST2603-4 Internal Hex Wrench

 B.
Consumable Materials

 (1)  
A00344 Compound - Soft Filmed (corrosion preventive), MIL-C-11796, Class 3

 C.
References

 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 25-59-01/401, Main Deck Compartment Cargo Lining Panel

 (3)  
AMM 32-09-02/201, Air/Ground Relay System

 (4)  
AIPC 27-62-09, Fig. 1

 D.
Access

 (1)  
Location Zone 211, 212 Passenger Cabin - Nose to First Door

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-62-08
 ALL  ú ú 04 Page 402 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

SEEA
SPACER BOOSTER SPRING
SCREW
SPACER
BEARING HOUSING (2 LOCATIONS)
STOP LEVER RETAINING NUT
STOP LEVER CRANK LINK PIN
FWD
INBD  MOUNTING
BRACKET

SOLENOID
A
Speed Brake Control Lever Lock Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-62-08
 ALL  ú ú 01 Page 403 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 E.  Procedure
 S 424-007
 (1)  
Install the control lever lock:

 (a)  
Install the solenoid on the mounting bracket with the bolts.

 (b)  
Put the stop lever in its position in the mounting bracket.

 (c)  
Install the spacer and the bearing housing.

 (d)  
Apply the corrosion preventive compound to the splines on the stop lever and the retaining nut.

 (e)  
Install the stop lever crank on the stop lever.

 (f)  
Use the internal hex wrench to install the retaining nut on the stop lever crank.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 7(21)