CLOGGING
INDICATOR
SEE B
FILTER
ELEMENT
LUBRICATION UNIT
FILTER O-RINGS FWDCOVER
DRAIN PLUG
BOLT
(3 LOCATIONS)
A
Oil Supply Filter-Element Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-03
ALL ú
ú C01 Page 402
ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 034-006-C00
(5) Remove the cover from the housing of the oil supply filter.
(a) Discard the O-ring.
S 024-007-C00
(6) Remove the filter element.
NOTE:____There are two types of filter elements. One is cleanable and the othe is not.
S 864-026-C00
(7) Discard or clean the filter element as appropriate per filter design.
(a) Discard the O-ring.
TASK 79-21-03-404-008-C00
3. Install the Oil Supply Filter Element_____________________________________
A. Consumable Material
(1) Lubricant, (CP2104), Molykote G Rapid -
B. References
(1)
AMM 12-13-11/301, Engine Oil
(2)
AMM 71-00-00/501, Power Plant
(3)
AMM 71-11-02/201, Fan Cowl Panels
C. Access
(1)
Location Zones
506 Engine No. 1
606 Engine No. 2
(2)
Access Panels
5737L/5746L Fan Cowl Panels - Engine No. 1
5837R/5846R Fan Cowl Panels - Engine No. 2
D. Procedure (Fig. 401)
S 214-009-C00
(1) Make sure each groove in the new filter element are clean.
NOTE:____Use a new or cleaned filter element. The filter elements can be used again.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-03
ALL ú ú C02 Page 403 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 424-027-C00
CAUTION: MAKE SURE YOU INSTALL THE O-RINGS CORRECTLY DURING THE
_______ INSTALLATION OF THE FILTER ELEMENT. IF YOU DO NOT INSTALL THE O-RINGS CORRECTLY, OIL LOSS CAN OCCUR DURING ENGINE OPERATION AND CAN CAUSE DAMAGE TO THE ENGINE.
CAUTION:_______DO NOT REUSE A NON CLEANABLE FILTER ELEMENT. THIS TYPE OF FILTER ELEMENT MUST BE DISCARDED. USING A NON CLEANABLE FILTER WILL AFFECT FILTRATION CAPABILITY AND ENGINE OIL SYSTEM INTEGRITY.
(2)
Install the two new O-rings, lightly lubricated with engine oil, in the two grooves in the filter element.
S 424-011-C00
(3)
Install the filter element in the filter housing.
S 214-012-C00
(4)
Make sure the groove in the cover of the filter housing is clean and has no damage.
S 434-013-C00
CAUTION: MAKE SURE YOU INSTALL THE O-RINGS CORRECTLY DURING THE
_______ INSTALLATION OF THE FILTER ELEMENT. IF YOU DO NOT INSTALL THE O-RINGS CORRECTLY, OIL LOSS CAN OCCUR DURING ENGINE OPERATION AND CAN CAUSE DAMAGE TO THE ENGINE.
(5)
Install the new O-ring, lightly lubricated with engine oil, in the groove in the cover of the filter housing.
S 434-014-C00
(6)
Install cover of the filter housing.
(a) Push the cover into the lubrication unit housing until it
touches the filter housing flange.
S 434-015-C00
(7)
Install the bolts (3 locations), lubricated with Molykote G Rapid, in the cover of the filter housing with the nuts and washers.
(a) Tighten the nuts to 42-46 pound-inches
(4.75-5.25 Newton meters).
(8)
Make sure the drain plug and surfaces that touch it are clean.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 滑油 OIL(31)
