(1)
Configuration One - Initial release, engines Pre CFMI SB 73-125 and Pre CFMI SB 73-A129.
(2)
Configurations Two and Three - Subsequent release, engines Post CFMI SB 73-125 and Pre CFMI SB 73-A125.
NOTE: CFMI SB 73-125 introduced the self-aligning nut and
____ washer modification to the fuel filter cover design.
NOTE: Configurations Two and Three appear visually to be the
____ same, but in fact are different in design. The hardware for Configurations Two and Three is not interchangeable, and should not be mixed.
(3) Configuration Four - Latest release, engines Post CFMI SB 73-125 and Post CFMI SB 73-A129.
NOTE: CFMI SB 73-A129 introduced the D-head bolt modification
____
to the fuel filter cover.
TASK 73-11-02-004-001-C00
2. Fuel Filter Cartridge Removal
_____________________________
A. Equipment
(1) Container - 1-gallon (4-liter) capacity,
suitable for fuel, local purchase
B. Consumable Materials
(1) B00682 Solvent - Stoddard (CP2011) (AMM 70-10-01/201)
C. References
(1)
AMM 24-22-00/201, Electrical Power
(2)
AMM 71-11-02/201, Fan Cowl Panel
D. Access
(1) Location Zones
506 Engine No. 1
606 Engine No. 2
E. Procedure
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-02
ALL ú ú C02 Page 401 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 864-104-C00
CAUTION:_______ THERE ARE SEVERAL DIFFERENT TYPES OF ATTACHMENTS FOR THE FUEL
FILTER COVER. BEFORE YOU BEGIN THE TASK, VISUALLY CHECK THE
FUEL FILTER COVER TO DETERMINE THE TYPE OF ATTACHMENT
CONFIGURATION. DO THE PROCEDURE FOR THAT CONFIGURATION.
(1)
Supply the electrical power (AMM 24-22-00/201).
S 864-004-C00
(2)
Make sure the applicable engine start lever is in the CUTOFF position.
S 864-005-C00
(3)
Make sure the FUEL VALVE CLOSED (engine fuel shutoff valve) indicator light on fuel control panel on the P5 panel is illuminated dim.
S 864-024-C00
(4)
Attach a DO-NOT-OPERATE tag on the applicable engine start lever.
S 864-006-C00
(5)
Remove the electrical power (AMM 24-22-00/201).
(a) Set the BAT switch on the Electrical Meters Battery and Galley Power Module (P5-13) to the OFF position and install a DO-NOT-OPERATE tag.
S 014-007-C00
(6)
Open the left fan cowl panel (AMM 71-11-02/201).
S 844-033-C00
(7)
Put a suitable container, 1 US gallon (4 liters) in capacity, under the engine to collect any residual fuel that may drain out.
(a) Cut and remove lockwire from drain plug (70).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-11-02
ALL ú ú C02 Page 402 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEE B
FUEL FILTER COVER (6 LOCATIONS) BOLT
DRAIN PLUG SEE A
FUEL FILTER HOUSING
A
CARTRIDGE
0-RING CARTRIDGE
DRAIN PLUG HANDLE SEE C FILTER COVER C
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 發動機燃油和控制(27)
