(2)
AMM 71-11-02/201, Fan Cowl Panels
(3)
AMM 72-00-00/201, Engine
B. Access
(1)
Location Zones 506 Engine No. 1 - top end of accessory gearbox, forward side 606 Engine No. 2 - top end of accessory gearbox, forward side
(2)
Access Panels
5746L Engine No. 1 - Left Fan Cowl Panel
5846R Engine No. 2 - Left Fan Cowl Panel
C. Procedure (Fig. 401)
S 864-002-C00
(1) Remove electrical power (AMM 24-22-00/201).
(a) Set the BAT switch on the Electrical Meters Battery and Galley Power Module (P5-13) to the OFF position and install a DO-NOT-OPERATE tag.
S 014-003-C00
(2)
Open the left fan cowl panel (AMM 71-11-02/201).
S 034-004-C00
(3)
Disconnect the two electrical connectors from the control alternator housing.
S 494-005-C00
(4)
Put caps on the alternator and cable connectors.
S 034-006-C00
(5)
Remove the three bolts that attach the control alternator housing to the accessory gearbox pad.
NOTE: Oil traces found in the stator housing and around the
____ rotor is a permitted and usual condition.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-21-08
ALL ú ú C02 Page 401 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
N2 CONTROL
CFMI ALTERNATOR
CABLE TO PMC SPEED SENSOR
(DARK BLUE) HOUSING
BOEING
ELECTRICAL
SEE A CONNECTOR D552
ACCESSORY
GEAR
BOX
(AGB)
AGB HAND CRANKING COVER PLATE
SEE B
(SHEET 2)
START
VALVE
A
N2 Control Alternator Speed Sensor Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-21-08
ALL ú ú C01 Page 402 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 024-007-C00
(6) Remove the alternator housing from the gearbox pad.
NOTE: It is possible that the o-ring between the two will be
____ bonded. If the o-ring is bonded, it will be necessary to turn the housing while the sensor is removed.
S 034-008-C00
(7)
Remove and discard the o-ring.
S 034-009-C00
(8)
Remove the pad cover for N2 rotor rotation (AMM 72-00-00/201) from the gearbox.
S 494-010-C00
(9)
Put a 3/4 inch square drive wrench into the 3/4 inch drive receptacle in the gearbox to lock the N2 drive.
S 034-011-C00
(10)
Remove the nut that attaches the rotor to the gearshaft of the control alternator pad.
SPEED SENSOR HOUSING
N2 Control Alternator Speed Sensor Installation Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-21-08
ALL ú ú C02 Page 403 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 發動機燃油和控制(131)
