73-21-09
 ALL  ú ú C01 Page 401 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
T2 ELEMENT  INLET COWL
SEE A SEALANT
FWDSEE B
B
T2 TEMPERATURE SENSOR HOUSING
T2 TEMPERATURE SENSOR ELEMENT
CLAMPS
A
INLET COWL
T2 Temperature Sensor Installation
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-21-09
 ALL  ú ú C01 Page 402 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SENSOR ELEMENT
REMOVAL OF THIS CLAMP IS OPTIONAL SEE A
T2 TEMPERATURE
SENSOR ELEMENT
STOW BRACKET

FWD
FWD
T2 TEMPERATURE SENSOR ELEMENT IN STOWED POSITION A
T2 Temperature Sensor Installation Figure 401 (Sheet 2)
T2 TEMPERATURE
SENSOR HOUSING
PB TUBE
P7 TUBE
G-M56-MM-0199(1)-01-B
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-21-09
 ALL  ú ú C01 Page 403 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(d)  Remove the four bolts, washers and nuts that attach the housing to the fan case brackets.
 TASK 73-21-09-504-005-C00
 3.  Stow the T2 Temperature Sensor Element______________________________________
 A. General
 (1)  This procedure must be used before you replace the fan inlet.
 B. Access
 (1)  
Location Zones
 506 Engine No. 1 - 10:30 o'clock position
 606 Engine No. 2 - 10:30 o'clock position

 (2)  
Access Panels
 5746L Engine No. 1 - Left Fan Cowl Panel
 5846R Engine No. 2 - Left Fan Cowl Panel

 C. Procedure (Fig. 401)
 S 554-006-C00
 (1)  Put the sensor element on the stow bracket.
 (a)  
Remove the sensor element from the fan inlet, refer to task 2.

 (b)  
Install the sensor element on the stow bracket.

 NOTE: Use three of the same four fasteners used on the fan
____ inlet duct. Put the fourth bolt and washer in the remaining hole on the stow bracket.
 S 024-007-C00
 (2)  Do this procedure in the opposite sequence to remove the sensor element.
 TASK 73-21-09-404-008-C00
 4.  Install the T2 Temperature Sensor_________________________________
 A. Consumable Materials
 (1)  Sealant - Pro Seal 860 (AMM 70-10-01/201)
 B. References
 (1)  AMM 70-10-01/201, Consumable Materials
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 73-21-09
 ALL  ú ú C01 Page 404 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(2)  
AMM 71-11-02/201, Fan Cowl Panels

 (3)  
AMM 71-00-00/501, Power Plant

 C. Access
 (1)  
Location Zones
 506 Engine No. 1 - 10:30 o'clock position
 606 Engine No. 2 - 10:30 o'clock position

 (2)  
Access Panels
 5746L Engine No. 1 - Left Fan Cowl Panel
 5846R Engine No. 2 - Left Fan Cowl Panel

 D. Procedure
 S 434-009-C00
 (1)  Attach the housing to the fan case brackets with four bolts, washers and nuts.
 (a)  Tighten the nuts to 55-70 pound-inches (6-8 Newton meters).
 S 164-010-C00
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 發(fā)動機燃油和控制(135)