(c)
Push and hold the RESET switch on the flapper valve assembly.
(d)
Push and hold the door open against the stop.
(e)
Release the RESET switch.
(f)
Make sure the door stays in the open position.
(g)
Set the CARGO FIRE AFT switch on the P5 overhead panel to the OFF position.
(h)
Remove the DO-NOT-CLOSE identifiers and close these circuit breakers: 1) 6H6, FIRE EXTINGUISHER LOWER CARGO 2) 6H7, FIRE EXTINGUISHER MN DK CARGO
S 432-023
(6)
Put the screen on the flapper valve assembly and install the screws (4 locations).
(7)
Install the sidewall lining (AMM 25-55-02/401).
S 412-017
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-26-09
ALL ú ú 02 Page 205 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
S 862-018
(8) Remove the electrical power if it is not necessary
(AMM 24-22-00/201).
TASK 21-26-09-822-005
4. Set the Position of the Bulk Cargo Flapper Valve
________________________________________________
A. References
(1)
24-22-00/201, Manual Control
(2)
IPC 21-26-55 Fig. 2
(3)
WDM 21-28-31
(4)
SSM 21-28-03
B. Access
(1) Location Zones
145 Bulk Cargo Compartment, Left
146 Bulk Cargo Compartment, Right
C. Procedure
S 862-001
(1)
Supply the electrical power (Ref 24-22-00/201).
S 012-002
(2)
Remove the screws (4 locations) that hold the screen to the flapper valve and remove the screen.
S 822-003
(3)
Set the flapper valve to the open position:
WARNING: MAKE SURE THE CIRCUIT BREAKERS IN THE SUBSEQUENT STEP ARE
_______ OPENED. IF THEY ARE NOT OPENED, THE FIRE EXTINGUISHER BOTTLES COULD RELEASE THEIR CONTENTS AND CAUSE INJURY TO PERSONEL
(a)
Open these circuit breakers on the main power distribution panel, P6, and attach DO-NOT-CLOSE identifiers: 1) 6H6, FIRE EXTINGUISHER LOWER CARGO 2) 6H7, FIRE EXTINGUISHER MN DK CARGO
(b)
Set the CARGO FIRE AFT switch on the P5 overhead panel to the ARMED position.
(c)
Push and hold the RESET switch on the flapper valve assembly.
(d)
Push and hold the door open against the stop.
(e)
Release the RESET switch.
(f)
Make sure the door stays in the open position.
(g)
Set the CARGO FIRE AFT switch on the P5 overhead panel to the OFF position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-26-09
ALL ú ú 02 Page 206 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
(h) Remove the DO-NOT-CLOSE identifiers and close these circuit breakers: 1) 6H6, FIRE EXTINGUISHER LOWER CARGO 2) 6H7, FIRE EXTINGUISHER MN DK CARGO
(4) S 412-006Put the screen on the flapper valve assembly and install the screws (4 locations).
(5) S 862-004Remove the electrical power if it is not necessary (Ref 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-26-09
ALL ú ú 01 Page 207 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
FORWARD CARGO VENTILATION FAN - REMOVAL/INSTALLATION
____________________________________________________
1. General
_______
A. There are two forward cargo vent fans installed above the compartment ceiling.
B. The removal and installation for the two fans is the same.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 空調 AIR CONDITIONING 1(66)
