C. The aft cargo heat control and override valves are installed on the inboard bulkhead of the right body wheel well.
TASK 21-44-01-004-001
2. Valve Removal (Fig. 401)_____________
A. References
(1)
AMM 09-11-00/201, Towing
(2)
AMM 24-22-00/201, Manual Control
(3)
AMM 32-00-30/201, Landing Gear Door Locks
(4)
AMM 36-00-00/201, Pneumatic System
(5)
AIPC 21-44-00 Fig. 1A
(6)
AIPC 21-44-00 Fig. 5
(7)
AIPC 21-44-00 Fig. 7
(8)
WDM 21-44-11, 21-44-12
(9)
SSM 21-44-01
B. Access
(1) Location Zone
136 Wing Landing Gear Well, RH
138 Body Landing Gear Well, RH
C. Procedure
S 864-002
(1)
Apply electrical power (AMM 24-22-00/201).
(2)
Release the pressure in the pneumatic system (AMM 36-00-00/201).
S 864-004
(3)
Push the ECS switch on the EICAS Display Select Panel.
S 864-003
(a) Make sure the EICAS ECS synoptic display shows that the DUCT PSI left and right are approximately zero.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-44-01
ALL ú ú 07 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
INBOARD
BODY LDG GEAR
SEE A WHEEL WELL
BULKHEAD
AFT CARGO
TRIM VALVES
PNEUMATIC
DUCT
BONDING
JUMPERS
ELECTRICAL
CONNECTOR
OVERRIDE
VALVE ELECTRICAL CONTROL
CONNECTOR CLAMPS VALVE A
Aft Cargo Heat Valves - Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-44-01
ALL ú ú 04 Page 402 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
S 864-005
(4) Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
P7 Overhead Circuit Breaker Panel
1) 7H09 CARGO HEAT AFT
(b)
P415 Power Distribution Center - Right 1) 415L29 AFT CARGO HEAT PWR
S 494-006
(5) Make sure the landing gear ground locks are installed (AMM 09-11-00/201).
S 494-032
WARNING: MAKE SURE THAT ALL PERSONS AND EQUIPMENT ARE CLEAR OF THE DOOR
_______ OPERATION AREA. FAST MOVEMENT OF THE DOORS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT. REFER TO AMM 32-00-30/201 FOR LANDING GEAR DOOR LOCK INSTALLATION PROCEDURE.
(6)
Install the body and the wing gear door locks (AMM 32-00-30/201).
S 034-008
(7)
Remove the electrical connector from the valve.
(a)
The aft cargo control valve electrical connector - DV10
(b)
The aft cargo override valve electrical connector - DV11
S 034-010
(8) Remove the bonding jumpers from the valve (2 locations).
S 034-011
WARNING: MAKE SURE THERE IS NO PRESSURE IN THE PNEUMATIC MANIFOLD BEFORE
_______ YOU REMOVE THE VALVE. THE REMOVAL OF THE VALVE WITH THE PNEUMATIC MANIFOLD PRESSURIZED CAN CAUSE INJURY TO PERSONS
(9)
Remove the clamps from each end of the valve and remove the valve.
S 034-013
(10)
Put covers on the duct openings to prevent entry of unwanted objects.
TASK 21-44-01-404-014
3. Valve Installation (Fig. 401)
__________________
A. References
(1) AMM 09-11-00/201, Towing
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 空調 AIR CONDITIONING 1(160)
