(2)  
25-35 Psig Regulated Air Supply (Hose and Nozzle)

 B. Access
 (1)  
Location Zone
 ZONE 5 LEFT NACELLE
 ZONE 6 RIGHT NACELLE

 (2)  
Access Panel 5742L AFT STRUT FAIRING (OUTBOARD) - LEFT NACELLE 5842R AFT STRUT FAIRING (OUTBOARD) - RIGHT NACELLE

 C. Procedure
 S 016-063-B00
 (1)  
Remove the fairing at the outboard forward end of the aft strut fairing (Fig. 601).

 S 216-064-B00

 (2)  
Remove the blockage as follows:

 (a)  
Put a rag above the drain line inlet to collect the contamination.

 (b)  
Put the plugs on the two ends of the drain tube (at the heat shield assembly drain inlet and midspar closeout web drain inlet).

 (c)  
Apply the 25-35 psig air pressure through the drain line exit.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-11-00
 ALL  ú ú B02 Page 613 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (d)  
Make sure the air flows freely from the strut midspar drain inlet.

 (e)  
Remove the rag and contamination from the drain line inlet.

 (f)  
Remove the plug from the heat shield assembly drain inlet.

 (g)  
Remove the plug from the midspar closeout web drain inlet.

 (h)  
Make sure all areas are clean and dry.

 S 416-065-B00
 (3)  Install the fairing at the outboard forward end of the aft strut fairing.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-11-00
 ALL  ú ú B02 Page 614 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 NACELLE STRUT DRAIN TUBE - REMOVAL/INSTALLATION
_______________________________________________
 1.  General
_______
 A.  There are two tasks in this procedure:
 (1)  
The first task is the removal of the nacelle strut (teflon) drain tube

 (2)  
The second task is the installation of the nacelle strut (teflon) drain tube.

 B.  The access to the nacelle strut drain tube is through the aft strut fairing access panel and the small access plate near the midspar fitting.
 C.  To install the nacelle strut drain tube, apply the heat to the two ends of the tube before they are attaches to the mating fitting.
 TASK 54-11-01-004-001-B00
 2.  Remove The Nacelle Strut Drain Tube
___________________________________
 A.  Access
 (1)  
Location Zone
 ZONE 5 LEFT NACELLE
 ZONE 6 RIGHT NACELLE

 (2)  
Access Panel
 5742L AFT STRUT FAIRING - LEFT NACELLE
 5842R AFT STRUT FAIRING - RIGHT NACELLE

 SMALL ACCESS PLATE (NEAR MIDSPAR FITTING)
 B.  Procedure
 S 014-003-B00
 (1)  
Remove the aft strut fairing access panel (Fig. 401).

 S 014-004-B00

 (2)  
Remove the small access plate near the midspar fitting.

 S 034-005-B00

 (3)  
Disconnect the aft end of the strut drain tube (at the elbow) as follows:

 (a)  
Loose the clamp at the elbow end of the strut drain tube.

 (b)  
Disconnect the strut drain tube from the elbow.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-11-01
 ALL  ú ú B01 Page 401 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

Nacelle Strut Drain Tube - Remove/Installation
Figure 401
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 NACELLES/PYLONS(28)