DIAGONAL BRACE (STRUT END) (VIEW IN THE FORWARD DIRECTION)
F
Nacelle Strut Installation Figure 402 (Sheet 4)
E37171
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
54-10-01
ALL ú ú B01 Page 413 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
BOLT
COTTER PIN
DIAGONAL BRACE (WING END)
(VIEW IN THE FORWARD DIRECTION)
Nacelle Strut Installation
Figure 402 (Sheet 5)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
54-10-01
ALL ú ú B01 Page 414 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E37172
A 737-300/400/500MAINTENANCE MANUAL
WING
FWD
THE LEFT ASSEMBLY IS SHOWN, THE RIGHT ASSEMBLY IS THE SAME
Nacelle Strut Installation
Figure 402 (Sheet 6)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
54-10-01
ALL ú ú B03 Page 415 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E37174
A
737-300/400/500MAINTENANCE MANUAL
2) If you remove an optional (custom fitted) diagonal brace, this same brace, or a new brace with the same center-to-center distance, must be installed on the same strut and airplane where it was removed. a) Tag the brace with the airplane number and the strut
location, or make sure this data is marked on the brace.
(b)
Remove the cotter pin, nut, bolt, two washers, and two caps.
(c)
Remove the pin: 1) Apply a thin layer of grease to a new pin or a brass slug. 2) Push out the pin with the new pin or the brass slug.
a) Make sure the clevis and the lug stay aligned.
S 024-028-B00
CAUTION:_______MAKE SURE YOU USE A BRASS SLUG TO PUSH OUT THE FUSE PIN. IF YOU DO NOT USE A BRASS SLUG, THE CLEVIS MAY NOT STAY ALIGNED WITH THE LUG. DAMAGE TO THE BUSHINGS OR THE STRUCTURE CAN OCCUR.
CAUTION: MAKE SURE ALL THE UPPER LINK PINS AND MIDSPAR FUSE BOLTS ARE
_______ INSTALLED. DAMAGE TO THE STRUCTURE CAN OCCUR.
(2) Remove the aft fuse pin from the diagonal brace (Figure 402, Detail G).
(a)
Remove the cotter pin, nut, bolt, two washers, and two caps.
(b)
Remove the fuse pin: 1) Apply a thin layer of grease to a new pin or a brass slug. 2) Push out the pin with the new pin or the brass slug.
a) Make sure the clevis and the lug stay aligned.
S 024-029-B00
CAUTION:_______MAKE SURE YOU USE A BRASS SLUG TO PUSH OUT THE PIN. IF YOU DO NOT USE A BRASS SLUG, THE CLEVIS MAY NOT STAY ALIGNED WITH THE LUG. DAMAGE TO THE BUSHINGS OR THE STRUCTURE CAN OCCUR.
CAUTION: MAKE SURE ALL THE MIDSPAR FUSE BOLTS AND DIAGONAL BRACE PINS
_______ ARE INSTALLED. DAMAGE TO THE STRUCTURE CAN OCCUR.
(3) Remove the forward pin from the upper link (Figure 402, Detail E).
(a)
Remove the cotter pin, nut, bolt, two washers, and two caps.
(b)
Remove the pin: 1) Apply a thin layer of grease to a new pin or a brass slug. 2) Push out the pin with the new pin or the brass slug.
a) Make sure the clevis and the lug stay aligned.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
54-10-01
ALL ú ú B01 Page 416 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 NACELLES/PYLONS(16)
