S 444-064-B00

 (7)  
Do the activation procedure for the thrust reverser (AMM 78-31-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-10-01
 ALL  ú ú B03 Page 425 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

Attach Fittings
Figure 601

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-10-01
 ALL  ú ú B01 Page 601 ú Jul 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
G69589
A
737-300/400/500MAINTENANCE MANUAL
 STRUT ATTACH POINT BUSHING MIGRATION - INSPECTION/CHECK
_______________________________________________________
 1.  General
 A.  This procedure contains the data to do an inspection of the bushings for the nacelle strut fuse pins as follows:
 (1)  
The lugs on the forward end of the upper link and on both ends of the diagonal brace assemblies,

 (2)  
the strut to wing fitting lugs of the strut,

 (3)  
the strut fitting for the diagonal brace.

 TASK 54-10-01-206-001-B00
 2.  Bushing Migration Inspection____________________________
 A.  Consumable Materials
 (1)  A00247 Sealant - BMS 5-95 (AMM 20-30-02)
 B.  References
 (1)  
AMM 20-30-11/201, Sealant Application

 (2)  
AMM 27-81-00/201, Leading Edge Slat System

 (3)  
AMM 54-32-01/401, Forward Fairing

 (4)  
AMM 54-32-02/401, Aft Fairings

 (5)  
AMM 54-33-01/201, Strut Pressure Relief and Access Doors

 C.  Access
 (1)  Location Zones
 500 Nacelle Strut - Left
 600 Nacelle Strut - Right

 D.  Prepare for the Inspection
 S 046-013-B00
 (1)  
Do the deactivation for the thrust reverser for ground maintenance (AMM 78-31-00/201)

 S 046-002-B00

 (2)  
Do the deactivation procedure for the leading edge slats in the retracted position (AMM 27-81-00/201).

 S 016-003-B00

 (3)  
Remove the applicable strut doors, panels and fairings (AMM 54-32-01/401).

 (a)  
Remove the access panels of the aft fairing to get access to the forward and aft diagonal brace fuse pins (AMM54-32-01/401).

 (b)  
Remove the wing junction fairing to get access to the midspar fuse pins (AMM 54-32-01/401).

 (c)  
Remove the forward leading edge fairing to get access to the upper link pins (AMM 54-32-01/401).

 (d)  
Remove the engine fan-cowl panels (AMM 71-11-02/401).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 54-10-01
 ALL  ú ú B01 Page 602 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 E. Do the Inspection
 S 216-006-B00
 (1)  Look for bushing migration along the outside edge of the bushings at these locations:
 NOTE: The definition of a migrated bushing is a bushing that
____ has a cracked fillet seal or a gap of 0.005 inches or more between the lug face and the bushing flange.
 (a)  
Forward end of the upper link assembly

 (b)  
The wing fitting (overwing fitting assy - nacelle support).

 (c)  
Wing fitting (aft end) of the diagonal brace assembly

 (d)  
The strut fitting at the forward end of the diagonal brace assembly

 (e)  
The strut midspar fitting lugs (inboard and outboard sides).

 S 216-007-B00
 (2)  
If you do not find bushing migration, stop the inspection.

 S 216-008-B00

 (3)  
If you find bushing migration do these steps:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 NACELLES/PYLONS(22)