27-11-00
ALL ú ú 02 Page 532 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(e) With full RIGHT WING DOWN trim input, do a check of the control
wheel movement:
1) Manually turn the captain's control wheel to 105 degrees
clockwise.
2) Turn the captain's control wheel back to the neutral
position.
3) Turn the captain's control wheel counterclockwise to 75
degrees.
a) Make sure the captain's control wheel moves freely.
(f) With full RIGHT WING DOWN trim input, do a check of the
electric aileron trim actuator in the main gear wheel well:
1) Make sure the aileron trim actuator does not touch the
retaining pin of the aileron centering spring when you turn
the control wheel counterclockwise.
2) Measure the force necessary to hold the control wheel at
the 75 degrees position.
a) Make sure that the force is not more than 21 pounds at
6.5 inches radius or 137 pound-inches torque.
3) Release the control wheel.
a) Make sure that the control wheel goes back to 60 |3
degrees (10 |1/2 trim indicator units) clockwise.
NOTE: If it is necessary, apply a light finger____
pressure to the control wheel while trimming the
aileron to achieve the required 10 units
deflection of control wheel. The light manual
help for the control wheel to turn is to
overcome possible friction in the input side of
the control system which can be slightly greater
than the force of the centering springs to hold
the centering roller into the cam detent.
(g) Operate the two aileron trim switches to put the aileron
control wheels back to the neutral position.
(h) Operate one aileron trim switch in the LEFT WING DOWN
direction.
(i) Operate the same aileron trim switch in the RIGHT WING DOWN
direction.
1) Make sure the control wheels do not move.
(j) Operate the other aileron trim switch in the LEFT WING DOWN
direction.
(k) Operate this same aileron trim switch in RIGHT WING DOWN
direction.
1) Make sure the control wheels do not move.
S 725-041
(11) Do a test on the aileron transfer mechanism (Paragraph 4).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-00
ALL ú ú 01 Page 533 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 725-015
(12)
Do a test on the autopilot aileron actuator (F80217 test set) or do a test on the autopilot aileron actuator (DFCS BITE) (AMM 22-11-25/501).
S 715-079
(13)
AIRPLANES WITH AN AILERON FORCE LIMITER; Do a test of the aileron force limiter (AMM 22-11-13/501).
G.
Put the Airplane Back to Its Usual Condition
S 865-017
(1)
Release pressure from hydraulic systems A and B (AMM 27-11-00/201).
S 865-018
(2)
Remove electrical power if it is not necessary (AMM 24-22-00/201).
S 095-049
(3)
Remove the control surface protractor and the protractor mount from the aileron control wheel.
TASK 27-11-00-715-030
4. Operational Test - Control Wheel and Control Column___________________________________________________
A. Access
(1)
Location Zone 101 Control Cabin, LH 102 Control Cabin, RH 306 Wing Trailing Edge Aileron and Control Tab, LH 406 Wing Trailing Edge Aileron and Control Tab, LH
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 1(94)
