S 426-004
(3) Do this task: "Aileron Artificial Feel, Centering and Trim Mechanism Installation" (Ref 27-11-81/401).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-81
ALL ú ú 02 Page 601 ú Nov 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
PRESSURE DECK
SHAFT ASSEMBLY AILERON CONTROL
ASSEMBLY SUPPORT REACTION B B
A
FWD
A
Aileron Artificial Feel, Centering and Trim Mechanism Wear Limits
Figure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-81
ALL ú ú 02 Page 602 ú Nov 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
2.
SUPPORT/BEARING (2 LOCATIONS)
3.
SUPPORT/ BEARING
SLEEVE
(2 LOCATIONS)
B-B
Aileron Artificial Feel, Centering and Trim Mechanism Wear Limits
Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-81
ALL ú ú 02 Page 603 ú Nov 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
INDEX NO. PART NAME DIM. DESIGN LIMITS WEAR LIMITS REPLACE WORN PART REPAIR WORN PART REPAIR INSTR
DIAMETER DIM. WEAR MITTED PER- DIA MAX CLEAR-ANCE
MIN MAX
1 BEARING ID 1.8115 1.8135 1.8140 0.0040 1 X
SUPPORT OD 1.8105 1.8115 1.8100 X
2 SUPPORT ID 2.2500 2.2510 2.2510 0.0025 1 X
BEARING OD 2.2485 2.2500 2.2485 X
3 SUPPORT ID 2.3750 2.3760 2.3760 0.0020 1 X
BEARING OD 2.3740 2.3750 2.3740 X
4 BEARING ID 1.4370 1.4380 1.4380 0.0020 1 X
SLEEVE OD 1.4360 1.4370 1.4360 X
5 SUPPORT ID 0.2500 0.2570 0.2585 0.0100 X
BOLT OD 0.2485 0.2495 0.2495 X
1 REPLACE THE BEARING WHEN THE RADIAL PLAY IS MORE THAN 0.0020 INCH.
Aileron Artificial Feel, Centering and Trim Mechanism Wear Limits
Figure 601 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-81
ALL ú ú 01 Page 604 ú Nov 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
AILERON BODY QUADRANT - REMOVAL/INSTALLATION
____________________________________________
1. General_______
A. There are two tasks in this procedure. There is one task for the removal and one task for the installation of the aileron body quadrant. The procedure has these parts:
(1)
The removal of the aileron artificial feel, centering and trim mechanism
(2)
The removal of the aileron body quadrant
(3)
The installation of the aileron body quadrant
(4)
The installation of the aileron artificial feel, centering and trim mechanism.
TASK 27-11-91-004-001
2. Aileron Body Quadrant Removal_____________________________
A. Special Tools and Equipment
(1)
F70207-93 Rig Pins Kit: ~............................................................................... | | | DIAMETER | LENGTH | | | REF NO. | F70207-( ) | (INCHES) |(INCHES) | FUNCTION | ................................................................................. | A/S-4 | -11 | 0.309-0.311 | 6.7 |0.25 | AILERON BUS DRUM | 2.........…............…..............….............…...........................1
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 1(157)
