(3) Do the test of the PA announcement from the cockpit with the cockpit-handset (Ref. AMM TASK 23-73-00-710-005).
R **ON A/C 106-149, 301-399, 401-499,
A. Test
(1) Do the BITE test of the AMU & ACP (Ref. AMM TASK 23-51-00-740-002).
(2) Do the CIDS Interface and Power-Up Test via the CFDS (Ref. AMM TASK 23-73-00-740-010).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page 231
Aug 01/05 CES
(3) Do the test of the PA announcement from the cockpit with the cockpit-handset (Ref. AMM TASK 23-73-00-710-005).
**ON A/C ALL
4. Fault Isolation
_______________
A. If the test gives a different maintenance message, do the trouble
shooting procedure related to the maintenance message.
**ON A/C 001-049, 051-099, 101-105, 201-299,
B. If the CIDS BITE test result is no fault message, but an announcement is not possible:
- remove DIR-CIDS, 1 (101RH) (Ref. AMM TASK 23-73-34-000-001).
- make sure that at least one cabin door is open.
- close these CBs:
49VU: 150RH (G02) CIDS/DIR 1 & 2/ESS
121VU:151RH (M05) CIDS/DIR 1 & 2/NORM,
- stop for approx. 120 s,
- make an announcement again.
(1) If an announcement is possible:
- install a new DIR-CIDS, 1 (101RH) (Ref. AMM TASK 23-73-34-400-001).
(2) If an announcement is not possible:
- replace the cockpit handset.
(a) If the fault continues:
- do a check and repair the wiring between the: DIR-CIDS (101RH) connector AB/J2 and the COCKPIT HANDSET (130RH) connector A/1, DIR-CIDS (101RH) connector AB/K2 and the COCKPIT HANDSET (130RH) connector A/2, DIR-CIDS (101RH) connector AB/C1 and the COCKPIT HANDSET (130RH) connector A/4, DIR-CIDS (101RH) connector AB/D1 and the COCKPIT HANDSET (130RH) connector A/5, DIR-CIDS (101RH) connector AB/G1 and the COCKPIT HANDSET (130RH) connector A/6, DIR-CIDS (101RH) connector AB/H1 and the COCKPIT HANDSET (130RH) connector A/7, DIR-CIDS (101RH) connector screen and GND, COCKPIT HANDSET (130RH) connector 3 and DIR-CIDS (101RH) connector screen (Ref. ASM 23-73/02).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page 232
Aug 01/05R
CES
R **ON A/C 106-149, 301-399, 401-499,
B. If the CIDS POWER-UP test result is no fault message, but an announcement is not possible:
- make sure that at least one cabin door is open,
- open these CBs:
49VU: 150RH COM/CIDS/DIR ESS/1,
49VU: 157RH COM/CIDS/DIR ESS/2,
49VU: 15WH AIR COND/CIDS/SDF/DIR 1 ESS,
49VU: 18WH AIR COND/CIDS/SDF/DIR 2 ESS,
120VU: 151RH COM NAC/CIDS/DIR NORM/1
120VU: 156RH COM NAV/CIDS/DIR NORM/2,
122VU: 14WH AIR COND/CIDS/SDF/DIR NORM/2,
122VU: 17WH AIR COND/CIDS/SDF/DIR NORM/1.
- wait for approx. 10 s and close the CBs 156RH, 157RH, 14WH and 18WH.
- stop for approx. 120 s,
- make an announcement again.
(1) If an announcement is possible:
- install a new DIR-CIDS, 1 (101RH) (Ref. AMM TASK 23-73-34-000-001) and (Ref. AMM TASK 23-73-34-400-001).
(2) If an announcement is not possible:
- replace the cockpit handset.
(a) If the fault continues:
- do a check and repair the wiring between the: DIR-CIDS (101RH) connector AB/J2 and the COCKPIT HANDSET (130RH) connector A/1, DIR-CIDS (101RH) connector AB/K2 and the COCKPIT HANDSET (130RH) connector A/2, DIR-CIDS (101RH) connector AB/C1 and the COCKPIT HANDSET (130RH) connector A/4, DIR-CIDS (101RH) connector AB/D1 and the COCKPIT HANDSET (130RH) connector A/5, DIR-CIDS (101RH) connector AB/G1 and the COCKPIT HANDSET (130RH) connector A/6, DIR-CIDS (101RH) connector AB/H1 and the COCKPIT HANDSET (130RH) connector A/7, DIR-CIDS (101RH) connector screen and GND, COCKPIT HANDSET (130RH) connector 3 and DIR-CIDS (101RH) connector screen (Ref. ASM 23-73/02).
**ON A/C 151-199,
B. If the CIDS BITE test result is no fault message, but an announcement is not possible:
- make sure that at least one cabin door is open,
- open these CBs:
49VU: 150RH (G01) COM DIR ESS/1
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 151-199, 301-399, 401-499, ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page 233 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 COMMUNICATIONS 通訊2(47)
