A. Test
(1) Do the BITE test of the AMU & ACP (Ref. AMM TASK 23-51-00-740-002).
(2) Do the CIDS BITE test (via CFDS) (Ref. AMM TASK 23-73-00-740-005).
(3) Do the test of the PA announcement from the cockpit with the cockpit-boomset/mike (Ref. AMM TASK 23-73-00-710-005).
R **ON A/C 106-149, 301-399, 401-499,
A. Test
(1) Do the BITE test of the AMU & ACP (Ref. AMM TASK 23-51-00-740-002).
(2) Do the CIDS Interface and Power-Up Test via CFDS (Ref. AMM TASK 23-73-00-740-010).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page 226
Aug 01/05 CES
(3) Do the test of the PA announcement from the cockpit with the cockpit-boomset/mike (Ref. AMM TASK 23-73-00-710-005).
**ON A/C ALL
4. Fault Isolation
_______________
A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
**ON A/C 001-049, 051-099, 101-105, 201-299,
B. If the CIDS BITE test result is no fault message, but an announcement is not possible:
- remove the DIR-CIDS, 1 (101RH) (Ref. AMM TASK 23-73-34-000-001),
- make sure that at least one cabin door is open.
- close these CBs:
49VU: 150RH (G02) CIDS/DIR 1 & 2/ESS
121VU: 151RH (M05) CIDS/DIR 1 & 2/NORM,
- stop for approx. 120 s,
- make an announcement again.
(1) If an announcement is possible:
- install a new DIR-CIDS, 1 (101RH) (Ref. AMM TASK 23-73-34-400-001).
(2) If an announcement is not possible:
- replace the cockpit boomset/mike.
(a) If the fault continues:
- do a check and repair the wiring if necessary between the: DIR-CIDS (101RH) connector AB/A1 and the AMU (1RN) connector AA/7E, DIR-CIDS (101RH) connector AB/B1 and the AMU (1RN) connector AA/7D, DIR-CIDS (101RH) connector AB/J1 and the AMU (1RN) connector AA/7A, DIR-CIDS (101RH) connector AB/K1 and the AMU (1RN) connector AA/7B, DIR-CIDS (101RH) connector AB/E1 and the AMU (1RN) connector AA/7F, DIR-CIDS (101RH) connector AB/A2 and the AMU (1RN) connector AA/6B, DIR-CIDS (101RH) connector AB/B2 and the AMU (1RN) connector AA/6A, DIR-CIDS (101RH) connector AB/D2 and the AMU (1RN) connector AA/6D, DIR-CIDS (101RH) connector AB/E2 and the AMU (1RN) connector AA/6E, DIR-CIDS (101RH) connector AB/F2 and the AMU (1RN) connector AA/6F,
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page 227
Aug 01/05R CES
DIR-CIDS (101RH) connector AB/G2 and the AMU (1RN) connector
AA/6H,
DIR-CIDS (101RH) connector AB/H2 and the AMU (1RN) connector
AA/6J (Ref. ASM 23-73/02).
1 If the fault continues:
_
- do the trouble shooting procedures for the Audio Management System (Ref. TASK 23-51-00-810-835).
R **ON A/C 106-149, 301-399, 401-499,
B. If the CIDS Interface and Power-Up Test result is no fault message, but an announcement is not possible:
- make sure that at least one cabin door is open,
- open these CBs:
49VU: 150RH COM/CIDS/DIR ESS/1,
49VU: 157RH COM/CIDS/DIR ESS/2,
49VU: 15WH AIR COND/CIDS/SDF/DIR 1 ESS,
49VU: 18WH AIR COND/CIDS/SDF/DIR 2 ESS,
120VU: 151RH COM NAC/CIDS/DIR NORM/1
120VU: 156RH COM NAV/CIDS/DIR NORM/2,
122VU: 14WH AIR COND/CIDS/SDF/DIR NORM/2,
122VU: 17WH AIR COND/CIDS/SDF/DIR NORM/1.
- wait for approx. 10 s and close the CBs 156RH, 157RH, 14WH and 18WH
- stop for approx. 120 s,
- make an announcement again.
(1) If an announcement is possible:
- install a new DIR-CIDS, 1 (101RH) (Ref. AMM TASK 23-73-34-000-001) and (Ref. AMM TASK 23-73-34-400-001).
(2) If an announcement is not possible:
- replace the cockpit boomset/mike.
(a) If the fault continues:
- do a check and repair the wiring if necessary between the: DIR-CIDS (101RH) connector AB/A1 and the AMU (1RN) connector AB/9C, DIR-CIDS (101RH) connector AB/B1 and the AMU (1RN) connector AB/9B, DIR-CIDS (101RH) connector AB/J1 and the AMU (1RN) connector AA/5A, DIR-CIDS (101RH) connector AB/K1 and the AMU (1RN) connector AA/4A, DIR-CIDS (101RH) connector AB/E1 and the AMU (1RN) connector AB/8C, DIR-CIDS (101RH) connector AB/A2 and the AMU (1RN) connector AB/7A, DIR-CIDS (101RH) connector AB/B2 and the AMU (1RN) connector AB/8A,
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 COMMUNICATIONS 通訊2(45)
