- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 23-73-00-740-010 Interface and Power-Up Test of the Cabin
Intercommunication Data System (CIDS) via the CFDS AMM 23-73-12-000-007 Removal of the Flight Attendant Panel (FAP) 120RH AMM 23-73-12-400-007 Installation of the Flight Attendant Panel (FAP)
120RH
AMM 23-73-34-000-001 Removal of the CIDS Director (101RH,102RH)
AMM 23-73-34-400-001 Installation of the CIDS Director (101RH,102RH)
ASM 23-73/23
3. Fault Confirmation
__________________
A. Test
(1) Do the CIDS Interface and Power-Up test through the CFDS (Ref. AMM TASK 23-73-00-740-010).
4. Fault Isolation
_______________
A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
B. If the test gives the maintenance message FAP <NAME> (120RH)/ DIR1 (101RH):
- install a new DIR-CIDS, 1 (101RH) (Ref. AMM TASK 23-73-34-000-001) and (Ref. AMM TASK 23-73-34-400-001).
(1) If the fault continues:
- replace the FAP (120RH) (Ref. AMM TASK 23-73-12-000-007) and (Ref. AMM TASK 23-73-12-400-007).
(a) If the fault continues:
- do a check and repair the wiring between:
- FAP <NAME> (120RH) connector A/1 and DIR1 (101RH) connector AA/5A,
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 301-399, 401-499, ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page B274
Aug 01/05 CES
- FAP <NAME> (120RH) connector A/2 and DIR1 (101RH) connector AA/5B,
- FAP <NAME> (120RH) connector A/3 and DIR1 (101RH) connrctor AA/13C,
- FAP <NAME> (120RH) connector A/4 and DIR1 (101RH) connector AA/13D, (Ref. ASM 23-73/23).
5. Close-up
________
A. Do the test as given in Para. 3.A.
TASK 23-73-00-810-925
FAP - passive Director no data from FAP (x)
1. Possible Causes
_______________
- FAP (120RH)
- DIR-CIDS, 2 (102RH)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 23-73-00-740-010 Interface and Power-Up Test of the Cabin
Intercommunication Data System (CIDS) via the CFDS AMM 23-73-12-000-007 Removal of the Flight Attendant Panel (FAP) 120RH AMM 23-73-12-400-007 Installation of the Flight Attendant Panel (FAP)
120RH
AMM 23-73-34-000-001 Removal of the CIDS Director (101RH,102RH)
AMM 23-73-34-400-001 Installation of the CIDS Director (101RH,102RH)
ASM 23-73/23
3. Fault Confirmation
__________________
A. Test
(1) Do the CIDS Interface and Power-Up Test via the CFDS (Ref. AMM TASK 23-73-00-740-010).
4. Fault Isolation
_______________
A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
B. If the test confirms the fault:
- install a new FAP (120RH) (Ref. AMM TASK 23-73-12-000-007) and (Ref. AMM TASK 23-73-12-400-007).
(1) If the fault continues:
- install a new DIR-CIDS, 2 (102RH) (Ref. AMM TASK 23-73-34-000-001) and (Ref. AMM TASK 23-73-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring between:
- FAP (120RH) connector A/5 and DIR-CIDS, 2 (102RH) connector AA/5A
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 301-399, 401-499, ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page B276
Aug 01/05 CES
- FAP (120RH) connector A/6 and DIR-CIDS, 2 (102RH) connector AA/5B
- FAP (120RH) connector A/7 and DIR-CIDS, 2 (102RH) connector AA/13C
- FAP (120RH) connector A/8 and DIR-CIDS, 2 (102RH) connector AA/13D (Ref. ASM 23-73/23)
5. Close-up
________
A. Do the test as given in Para. 3.A.
TASK 23-73-00-810-926
CAM - Fault in Cabin Assignment Modul (passive Director)
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 COMMUNICATIONS 通訊2(140)
