F 『
E C F M E
E E
E 56-5B E
E E
Subtask 71-73-49-420-052
A. Installation of the Oil Tank Drain Hose
(1) Remove the protective covers from the oil tank, the drain tube and the drain hose.
(2) Connect the drain hose (25) to the oil tank. Do not torque the coupling nut at this time.
(3) Connect the oil tank drain hose (25) to the drain tube (20). Do not torque the coupling nut at this time.
(4) If removed, attach the tube (20) to the fan case channel with the clamp (5) and the bolt (10).
(5) Make sure that the oil tank drain hose (25) is aligned correctly on the engine.
(6) TORQUE the bolt (10) on the fan case channel to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).
(7) TORQUE the nuts (15) to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).
(8) Torque the hose coupling nuts. CAUTION : USE A SECOND WRENCH TO HOLD THE FITTINGS WHEN YOU
_______ LOOSEN/TIGHTEN THE TUBE COUPLING NUTS. THIS PREVENTS DAMAGE TO THE TUBES.
(a) TORQUE the hose (25) coupling nuts to between 200 and 250 lbf.in
(2.26 and 2.82 m.daN).
Subtask 71-73-49-420-067
B. Installation of the Oil Tank Drain Tube
(1) Remove the protective covers from the drain manifold module, the drain tube and the drain hose.
(2) Connect the drain tube (20) to the drain hose (25). Do not torque the coupling nut at this time.
F 『R EEFF : 001-049, 051-061, 101-102, 201-202, E Page 41071-73-49
E E May 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
(3) Connect the drain tube (20) to the drain manifold module. Do not torque the coupling nut at this time.
(4) Attach the drain tube (20) to the fan case channel with the clamp (5) and the bolt (10).
(5) Attach the drain tube (20) to the fan case bracket with the clamp (5), the bolt (10) and the nut (15).
(6) Attach the drain tube (20) to the clamp on the fan case drain tube with the clamp (5), the bolt (10) and the nut (15).
(7) Make sure that the drain tube (20) is aligned correctly on the engine.
(8) TORQUE the bolt (10) on the fan case channel to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).
(9) TORQUE the nuts (15) to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).
(10) Torque the drain tube and hose coupling nuts.
CAUTION : USE A SECOND WRENCH TO HOLD THE FITTINGS WHEN YOU
_______ LOOSEN/TIGHTEN THE TUBE COUPLING NUTS. THIS PREVENTS DAMAGE TO THE TUBES.
(a) TORQUE the drain tube (20) and the drain hose (25) coupling nuts to between 200 and 250 lbf.in (2.26 and 2.82 m.daN).
R **ON A/C 062-099, 103-149, 151-199, 203-299, 301-399, 401-499,
Subtask 71-73-49-420-052-A
A. Installation of the Oil Tank Drain Hose
(1) Remove the protective covers from the oil tank, the drain tube and the drain hose.
(2) Connect the drain hose (25) to the oil tank. Do not torque the coupling nut at this time.
(3) Connect the oil tank drain hose (25) to the drain tube (20). Do not torque the coupling nut at this time.
F 『 EEFF : ALL E Page 41171-73-49
E E Aug 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
(4) If removed, attach the tube (20) to the fan case channel with the clamps (5) and the bolts (10).
(5) Make sure that the oil tank drain hose (25) is aligned correctly on the engine.
(6) TORQUE the bolts (10) on the fan case channel to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).
(7) TORQUE the nuts (15) to between 20 and 25 lbf.in (0.22 and 0.28 m.daN).
(8) Torque the hose coupling nuts. CAUTION : USE A SECOND WRENCH TO HOLD THE FITTINGS WHEN YOU
_______ LOOSEN/TIGHTEN THE TUBE COUPLING NUTS. THIS PREVENTS DAMAGE TO THE TUBES.
(a) TORQUE the hose (25) coupling nuts to between 200 and 250 lbf.in
(2.26 and 2.82 m.daN). Subtask 71-73-49-420-067-A
B. Installation of the Oil Tank Drain Tube
(1) Remove the protective covers from the drain manifold module, the drain tube and the drain hose.
(2) Connect the drain tube (20) to the drain hose (25). Do not torque the coupling nut at this time. 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM 動力裝置 POWER PLANT 2(108)
