(2)
Disconnect the accessory-gearbox vent pipe (1) from the de-oiling solenoid valve (8083KM) (5).
(3)
Install a blanking plug to the accessory-gearbox vent pipe (1).
(4)
Disconnect the electrical connection (2).
(5)
Put blanking caps on the disconnected electrical connectors.
(6)
Remove the bolts (3) and the washers (4) which attach the de-oiling solenoid valve (8083KM) (5) to the accessory gearbox.
(7)
Remove the de-oiling solenoid valve (8083KM) (5).
(8)
Put a blanking plug on to the accessory-gearbox.
(9)
Remove and discard the O-ring (6) from the de-oiling solenoid valve (8083KM) (5).
De-Oiling Solenoid Valve - Removal/Installation.
Figure 401/TASK 49-91-49-991-001
CES
De-Oiling Solenoid Valve - Removal/Installation.
Figure 401A/TASK 49-91-49-991-001-A
CES
R **ON A/C 001-003, 051-099, 401-499, Post SB 49-1063 For A/C 001-003,051-099, Subtask 49-91-49-020-050-A
A. Removal of the De-Oiling Solenoid Valve (8083KM)
(1)
Disconnect the accessory-gearbox vent pipe (1) from the de-oil valve assy.
(2)
Install a blanking plug on the accessory-gearbox vent pipe (1).
(3)
Disconnect the electrical connector (15).
(4)
Put blanking caps on the disconnected electrical connectors.
(5)
Remove the bolt (17), the washer (6), the nut (7) and the bonding strap (13)
(6)
Loosen the:
-
Jam-nut (3) of the elbow fitting (2)
-
Jam-nut (10) of the de-oil adapter (11).
(7)
Remove the bolts (11) and the de-oil valve assy (0) from the gearbox pad.
(8)
Remove and discard the O-ring (12).
(9)
Turn the elbow fitting (2) out of the de-oiling solenoid valve (6)
(10)
Remove and discard the nylon washer (4) and the O-ring (5).
(11)
Turn the de-oil adapter (10) out of the de-oiling solenoid valve (6).
(12)
Remove and discard the nylon washer (8) and the O-ring (7).
R **ON A/C 001-003, 051-099, 401-499,
TASK 49-91-49-400-001
Installation of the De-Oiling Solenoid Valve (8083KM) (GTCP 36-300)
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00
to 9.00 lbf.ft)
No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft)
B.
Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
No specific lockwire-corrosion resistant steel 0.8 mm (0.032 in) dia
Material No. 03-002 GB DEF-STAN 91-101
LUBRICATING OIL TURBINE ENGINE SYNT BASE
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
O-ring 49-91-04 02 -040 D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action
49-00-00-710-001 Self-Test of the ECB (59KD) (GTCP 36-300)
49-00-00-860-003 APU Start by External Power (GTCP 36-300)
49-00-00-860-004 APU Shutdown by External Power (GTCP 36-300)
49-90-00-600-001 Check Oil Level and Replenish (GTCP 36-300)
52-41-00-010-001 Open the APU Doors for Access
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 機載輔助動力 AIRBORNE AUXILIARY POWER 6(141)
