(2)
 Remove the safety locks and close the MLG doors (Ref. TASK 32-12-00-410-001).

 1EFF : ALL 1 32-33-17Page 409 1 1 Feb 01/98 1 1 1CES 1

 (3) Do a functional test of the free-fall extension system. (Ref. TASK 32-33-00-720-001) ________
5. Close-up
 Subtask 32-33-17-410-050
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the cabin floor panels 241LF, 242LF and 242FF (Ref. TASK 53-32-12-400-002).

 (3)
 Install the cabin floor covering that was removed (Ref. TASK 25-28-41-400-001).

 (4)
 Install the passenger seats that were removed (Ref. TASK 25-21-41-400-001).

 (5)
 Remove the access platform(s).

 (6) Remove the warning notice(s). Subtask 32-33-17-862-050
 B. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 1EFF : ALL 1 32-33-17Page 410 1 1 Feb 01/98 1 1 1CES 1

 TASK 32-33-17-350-001
 Replacement of the Shear-Pins

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific safety barriers
 No specific warning notice

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
Material No. 04-024B AIB AIMS 09-06-001 R SYNTHETIC GREASE FOR FLAP AND SLAT MECHANISM R (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
 -------------------------------------------------------------------------------
24 cotter-pin 32-33-03 32 -170 39 shear-pins 32-33-03 32 -040
 1EFF : ALL 1 32-33-17Page 411 1 1 Nov 01/01 1 1 1CES 1

 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power 25-21-41-000-001 Removal of the Passenger Seats 25-21-41-400-001 Installation of the Passenger Seats 25-28-41-000-001 Removal of the Textile Floor-Covering 25-28-41-400-001 Installation of the Textile Floor-Covering 32-00-00-481-001 Installation of the Safety Devices on the Landing
 Gears 32-12-00-010-001 Open the Main Gear Doors for Access 32-33-00-200-001 Check the Tension of the Landing Gear Free-Fall
 Extension Cables 32-33-00-720-001 Functional Test of the Free-Fall Extension 32-33-00-820-003 Adjustment of the MLG Free-Fall Extension Cable
 System 53-32-12-000-002 Removal of the Cabin Floor Panels 53-32-12-400-002 Installation of the Cabin Floor Panels 32-33-17-991-002 Fig. 402
 3. Job Set-up
__________
 Subtask 32-33-17-861-051
 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001)

 Subtask 32-33-17-941-052
 B. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:

 -Make sure that the landing-gear control-lever 6GA is in the DOWN position.
 -Put a warning notice in position to tell persons not to operate the landing gear.
 1EFF : ALL 1 32-33-17Page 412 1 1 Feb 01/98 1 1 1CES 1

 (4) On the panel 110VU, make sure that the GRAVITY GEAR EXTN handle is folded into the center console.
 Subtask 32-33-17-010-051
 C. Get Access
 (1)
 Open the right MLG door (Ref. TASK 32-12-00-010-001).

 (2)
 Make sure that the GROUND LOCK SLEEVE (460005835) is on the applicable main gear door actuator.

 (3)
 Remove the right hand passenger seats between frame 36 and 42 (Ref. TASK 25-21-41-000-001).

 (4)
 Remove the center floor covering between frame 36 and frame 42 (Ref. TASK 25-28-41-000-001).

 (5) Remove the floor panel 242FF (Ref. TASK 53-32-12-000-002). Subtask 32-33-17-560-050
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架6(33)