_______
 NOTICES ARE IN POSITION.

 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
__________________
R R Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
 No specific warning notice

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 Material No. 19-003  USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
8 cotter pins 32-33-01 05 -130 22 cotter pin 32-33-15 01 -030
 1EFF : ALL 1 32-33-16Page 410 1 1 May 01/04 1 1 1CES 1

 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-481-002 Installation of the Safety Devices on the Landing
 Gear Doors
R 32-00-00-860-001 Flight Configuration Precautions with Electrical
R Power
R 32-00-00-860-002 Ground Configuration after Flight Configuration with
R Electrical Power 32-22-00-010-001 Nose Gear Doors - Ground Doors Opening 32-22-00-410-001 Nose Gear Doors - Ground Doors Closing 32-33-00-720-001 Functional Check of Free-Fall Extension 32-33-00-820-001 Adjustment of the NLG Free-Fall Extension Cable System 53-12-11-000-001 Removal of the Cockpit Floor Panels from FR1 Thru FR12 53-12-11-400-001 Installation of the Cockpit Floor Panels from FR1 thru FR12 53-12-12-000-001 Removal of the Cabin Floor Panels from FR12 thru FR24 53-12-12-400-001 Installation of the Cabin Floor Panels from FR12 thru FR24 32-33-16-991-002 Fig. 403
 3. Job Set-up
__________
 Subtask 32-33-16-941-052
 A. Safety Precautions
 (1)
 Make sure that the safety barriers are in position.

 (2)
 Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:

 -
Make sure that the landing-gear control-lever 6GA is in the DOWN position.

 -
Make sure that the warning notice is in position to tell persons not to operate the landing gear.

 1EFF : ALL 1 32-33-16Page 411 1 1 May 01/05 1 1 1CES 1

 (4)
 On the panel 110VU, make sure that the GRAVITY GEAR EXTN handle is foled into the center console.

 (5)
 Make sure tha tthe wedges are installed on each side of the GRAVITY GEAR EXTN handle to lock it in position.

 Subtask 32-33-16-860-053
 B. Aircraft Maintenance Configuration
 (1)
 Make sure that the NLG doors are open (Ref. TASK 32-22-00-010-001).

 (2)
 Make sure that the NLG Safety Pins are installed (Ref. TASK 32-00-00-481-002).

 (3)
 Make sure that the cockpit floor panels are removed (Ref. TASK 53-12-11-000-001), (Ref. TASK 53-12-12-000-001).

 (4)
 Make sure that the avionics door is open.

 (5)
 Make sure that the RIGGING PIN (98A27801001000) is in the Pin 1 position.

 (6)
 Make sure that the PIN, RIGGING - RUDDER CONTROL (98A27901002000) is in the Pin 4 position.

 Subtask 32-33-16-869-056
 C. Flight Configuration Precautions
 (1)
 If you did not open the LGCIU circuit breakers, make sure that the electrical circuits are de-energized (Ref. TASK 24-41-00-862-002).

 (2)
 If you opened the LGCIU circuit breakers, make sure that the flight configuration precautions were obeyed (Ref. TASK 32-00-00-860-001).

 Subtask 32-33-16-865-051
 D. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架6(21)