(2)
 Make a mark on the DMC3 (Ref. TASK 31-63-00-440-001).

 (3)
 Install the DMC3 in the position of the defective DMC (Ref. TASK 31-63-34-400-001).

 5. Close-up
________
 Subtask 31-63-00-860-051
 A. Make sure that the work area is clean and clear of tool(s) and other items.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-63-00Page 402 1201-299, 301-302, 1Config-1 May 01/05 1 1 1CES 1 TASK 31-63-00-440-001

 Reactivation of the DMC (1WT1/1WT2/1WT3) (Installation of the DMC3 in its initial position)
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-00-040-001 Deactivation of the DMC (1WT1/1WT2/1WT3) 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
 3. Job Set-up
__________ Subtask 31-63-00-865-051
 A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU EIS/DMC3/SWTG 21WT3 E07 121VU EIS/DMC3/SPLY 10WT3 Q09
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-63-00Page 403 1201-299, 301-302, 1Config-1 May 01/05 1 1 1CES 1 Subtask 31-63-00-865-052

 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 1WT1
 49VU EIS/DMC1/SPLY 10WT1 E11 49VU EIS/DMC1/SWTG 21WT1 E09
 FOR 1WT2 121VU EIS/DMC2/SPLY 10WT2 Q08 121VU EIS/DMC2/SWTG 21WT2 R08
 4. Procedure
_________
 Subtask 31-63-00-420-050
 A. Reactivation of the DMC
 (1)
 Remove the DMC with the mark and install it in the position 3 (Ref. TASK 31-63-00-040-001) (Ref. TASK 31-63-34-400-001).

 (2)
 Install a new DMC in the position of the DMC1 (DMC2) (Ref. TASK 31-63-34-400-001).

 5. Close-up
________
 Subtask 31-63-00-860-052
 A. Make sure that the work area is clean and clear of tool(s) and other items.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-63-00Page 404 1201-299, 301-302, 1Config-1 May 01/05 1 1 1CES 1

 DISPLAY MANAGEMENT COMPUTER (DMC) / LIQUID CRYSTAL DISPLAY (LCD) CONTRO L AND
_____________________________________________________________________________
 INTERCONNECTION - REMOVAL/INSTALLATION
______________________________________ TASK 31-63-00-040-002 Deactivation of the DMC (1WT1/1WT2/1WT3)
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-63-00-440-001 Reactivation of the DMC (1WT1/1WT2/1WT3)
 (Installation of the DMC3 in its initial position) 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
 3. Job Set-up
__________ Subtask 31-63-00-860-053
 A. In the paragraph below (B.), open the circuit breakers related to the DMC 3 then open the circuit breakers related to the defective DMC only (DMC 1 or DMC 2).
R 1EFF : 401-499, 1 31-63-00Page 401 1 1 Config-2 Aug 01/05 1 1 1CES 1 Subtask 31-63-00-865-053

 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 1WT1
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 7(157)